Publicaciones en colaboración con investigadoras/es de Universidad Pública de Navarra (21)

2024

  1. Validation of the use of concept maps as an evaluation tool for the teaching and learning of mechanical and industrial engineering

    International Journal of Technology and Design Education

2023

  1. Applicability of existing models for the strength development of 3D-printed thixotropic concretes during hardening

    Mechanics of Advanced Materials and Structures, Vol. 30, Núm. 3, pp. 510-519

  2. Austenitic and Lean Duplex Stainless Steel Rebars in Concrete Under Simultaneous Load and Marine Corrosion Effect: A Service Lifetime Study

    Lecture Notes in Civil Engineering

  3. Tomography analysis of Al–Mg alloys manufactured by wire-arc directed energy deposition with different metal transfer modes

    Alexandria Engineering Journal, Vol. 82, pp. 168-177

2022

  1. Modeling of cutting force and final thickness for low stiffness 2024-T3 aluminum alloy part milling considering its geometry and fixtures

    Journal of Materials Research and Technology, Vol. 21, pp. 2416-2427

  2. Quality monitoring of blind fasteners installation: An approach from the manufacturing chain and visual analytics

    IFAC-PapersOnLine

2020

  1. Validation of the Use of Concept Maps as a Tool for the Teaching and Learning of Industrial Drawing

    Lecture Notes in Mechanical Engineering

2018

  1. El peso de la mujer en el ámbito universitario: Caso particular de mujeres doctoras en áreas científico-tecnológicas

    Evaluación de la Calidad de la Investigación y de la Educación Superior: Libro de resúmenes XV FECIES

  2. Sinergia Universidad-Empresa: El papel de las prácticas en las titulaciones de Ingeniería

    Evaluación de la Calidad de la Investigación y de la Educación Superior: Libro de resúmenes XV FECIES

2015

  1. Design of a solar tracking parallel mechanism with low energy consumption

    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 229, Núm. 3, pp. 566-579

2013

  1. Assessing position error due to clearances and deformations of links in parallel manipulators

    Journal of Mechanical Design, Transactions of the ASME, Vol. 135, Núm. 4

2012

  1. Improving static stiffness of the 6 - R US parallel manipulator using inverse singularities

    Robotics and Computer-Integrated Manufacturing, Vol. 28, Núm. 4, pp. 458-471

2011

  1. Accuracy analysis considering clearances and elastic deformations in parallel manipulators

    Proceedings of the ASME Design Engineering Technical Conference

  2. Effect of different cooling rates on the microstructure of Cu-Al-Fe alloy

    Canadian Metallurgical Quarterly, Vol. 50, Núm. 1, pp. 80-84

  3. Phase transformations in Cu-Al alloy

    Metal Science and Heat Treatment, Vol. 53, Núm. 5-6, pp. 265-269

  4. Workspace analysis of positioning discontinuities due to clearances in parallel manipulators

    Mechanism and Machine Theory, Vol. 46, Núm. 5, pp. 577-592

2010

  1. Einfluss der graphitschichtdicke in der metallischen druckgießform auf die mikrostruktur der aluminium-bronze-legierung

    Praktische Metallographie/Practical Metallography, Vol. 47, Núm. 11, pp. 654-664

  2. Influence of metallic die temperature in the solidification of Cu-10%Al-2%Fe Alloy

    Archives of Metallurgy and Materials, Vol. 55, Núm. 4, pp. 1029-1033

  3. Influence of mould parameters on the microstructure of cast copper aluminium bronze

    Revue de Metallurgie. Cahiers D'Informations Techniques, Vol. 107, Núm. 9, pp. 387-392

  4. Influence of the solidification rates in copper aluminium alloy

    Metallofizika i Noveishie Tekhnologii, Vol. 32, Núm. 7, pp. 939-947