Publicaciones en las que colabora con VICTOR PETUYA ARCOCHA (23)

2022

  1. Design and analysis of an active 2-DOF lockable joint

    Mechanics Based Design of Structures and Machines, Vol. 50, Núm. 8, pp. 2736-2759

2021

  1. Improving skills in mechanism and machine science using gim software

    Applied Sciences (Switzerland), Vol. 11, Núm. 17

  2. Quasi-Static Analysis of a Tapered Extendable Arm Inspired by an Origami with Modified Folding Diagram

    Mechanisms and Machine Science (Springer), pp. 652-658

2019

  1. Design of an active reconfigurable 2R joint

    Mechanisms and Machine Science (Springer Netherlands), pp. 1423-1429

  2. Designing a Translational Parallel Manipulator Based on the 3SS Kinematic Joint

    Journal of Mechanisms and Robotics, Vol. 11, Núm. 5

  3. Dynamics and mechanical vibrations. Complementing the theory with virtual simulation and experimental analysis

    Mechanisms and Machine Science (Springer Netherlands), pp. 64-71

2018

  1. Pa2 kinematic bond in translational parallel manipulators

    Mechanical Sciences, Vol. 9, Núm. 1, pp. 25-39

  2. Parallel manipulators: Practical applications and kinematic design criteria. Towards the modular reconfigurable robots

    Mechanisms and Machine Science

2017

  1. Multioperation capacity of parallel manipulators basing on generic kinematic chain approach

    Mechanism and Machine Theory, Vol. 116, pp. 234-247

  2. Translational parallel manipulator with Pa2 kinematic joints

    Mechanisms and Machine Science

2015

  1. Analysis of multi-operational capacity of a parallel manipulator

    2015 IFToMM World Congress Proceedings, IFToMM 2015

  2. Design of a solar tracking parallel mechanism with low energy consumption

    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 229, Núm. 3, pp. 566-579

  3. Educational and research kinematic capabilities of GIM software

    Mechanisms and Machine Science

  4. General purpose software to solve the inverse dynamics and compute the internal efforts of non-redundant planar mechanisms

    Mechanisms and Machine Science

2014

  1. Educational software tools for the kinematic analysis of mechanisms

    Computer Applications in Engineering Education, Vol. 22, Núm. 1, pp. 72-86

2013

  1. Computation of the protein molecular mechanism using adaptive dihedral angle increments

    Frontiers of Mechanical Engineering, Vol. 8, Núm. 1, pp. 104-108

  2. Computation of the protein molecular mechanism using adaptive dihedral angle increments

    Mechanisms and Machine Science

2012

  1. Planning Nonsingular Transitions Between Solutions of the Direct Kinematic Problem From the Joint Space

    Journal of Mechanisms and Robotics, Vol. 4, Núm. 4

2010

  1. Analysis of the direct kinematic problem in 3-dof parallel manipulators

    SYROM 2009 - Proceedings of the 10th IFToMM International Symposium on Science of Mechanisms and Machines

  2. Computing the configuration space for tracing paths between assembly modes

    Journal of Mechanisms and Robotics, Vol. 2, Núm. 3