Publicaciones (27) Publicaciones de PABLO FERNANDEZ DE LUCIO

2023

  1. ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL

    MM Science Journal, Vol. 2023-November, pp. 6901-6908

  2. Influencia del ángulo de posición en el diseño del rompevirutas:: Estudio de herramientas de torneado dinámico y de alto avance en inconel® 718

    Revista DYNA, Vol. 98, Núm. 4, pp. 406-412

  3. Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy

    Wear, Vol. 532-533

  4. On the effects of cutting-edge angle on high-feed turning of Inconel 718© superalloy

    International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 9-10, pp. 4237-4252

  5. Prediction of cutting forces including tool wear in high-feed turning of Nimonic® C-263 superalloy: A geometric distortion-based model

    Measurement: Journal of the International Measurement Confederation, Vol. 211

  6. THE EFFECT OF BROACHING TOOL CUTTING EDGES POLISHING ON PROCESS FORCES AND TEMPERATURE

    MM Science Journal, Vol. 2023-November, pp. 6844-6852

  7. The influence of cutting edge microgeometry on the broaching of Inconel 718 slots

    Engineering Science and Technology, an International Journal, Vol. 48

  8. Threading holder based on axial metal cylinder pins to reduce tap risk during reversion instant

    Alexandria Engineering Journal, Vol. 66, pp. 845-859

2022

  1. Analysis of the subject starting point and aspects for improvement based on the results of the student surveys

    15th annual International Conference of Education, Research and Innovation, 7-9 November 2022, Seville, Spain

  2. Application of active methodologies in the descriptive subject of ‘Mechanical Technology’

    15th annual International Conference of Education, Research and Innovation, 7-9 November 2022, Seville, Spain

  3. Nuevos procesos de torneado aplicados a turbinas aeronáuticas

    XV Congreso Iberoamericano de Ingeniería Mecánica-CIBIM 2022. UPM-España

2021

  1. Comparative study of finishing techniques for age-hardened Inconel 718 alloy

    Journal of Materials Research and Technology, Vol. 15, pp. 5623-5634

  2. Comparison between milling roughing operations in full slotting manufacturing: trochoidal, plunge and conventional milling

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012003

  3. Ebaketa-erradioaren eragina Inconel®718 fresatzeko erreminten bizitza erabilgarrian

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 40, pp. 361-373

  4. Effects of laser-textured on rake face in turning PCD tools for Ti6Al4V

    Journal of Materials Research and Technology, Vol. 15, pp. 177-188

  5. Machine learning en el campo de la fabricación

    Revista DYNA, Vol. 96, Núm. 6, pp. 600-604

  6. Roughing milling with ceramic tools in comparison with sintered carbide on nickel-based alloys

    Coatings, Vol. 11, Núm. 6

  7. Turning of Austempered Ductile Iron with ceramic tools

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 235, Núm. 3, pp. 484-493

2020

  1. A precise milling of integral blade rotors by using different strategies

    Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020

  2. Analysis of the influence of the hydrostatic ball burnishing pressure in the surface hardness and roughness of medium carbon steels

    IOP Conference Series: Materials Science and Engineering