Publicaciones en las que colabora con ALVARO CAMPOS CELADOR (19)

2019

  1. Dynamic neural networks to analyze the behavior of phase change materials embedded in building envelopes

    Applied Thermal Engineering, Vol. 158

2018

  1. A novel correlation for the direct determination of the discharging time of plate-based latent heat thermal energy storage systems

    Applied Thermal Engineering, Vol. 129, pp. 521-534

  2. Ventilation requirements based on carbon dioxide concentration criteria: implications on IAQ and energy use

    International Journal of Ventilation, Vol. 17, Núm. 4, pp. 256-271

2017

  1. A general model for the optimization of energy supply systems of buildings

    Energy, Vol. 138, pp. 954-966

2016

  1. Determination of the phase diagram and main thermophysical properties of the erythritol–urea eutectic mixture for its use as a phase change material

    Solar Energy Materials and Solar Cells, Vol. 157, pp. 894-906

  2. Finite cylinder-source model for energy pile heat exchangers: Effect of buried depth and heat load cyclic variations

    Applied Thermal Engineering, Vol. 96, pp. 130-136

  3. The sodium nitrate–urea eutectic binary mixture as a phase change material for medium temperature thermal energy storage. Part II: Accelerated thermal cycling test and water uptake behavior of the material

    Solar Energy Materials and Solar Cells, Vol. 157, pp. 1076-1083

2015

  1. Influence of the regulation framework on the feasibility of a Stirling engine-based residential micro-CHP installation

    Energy, Vol. 84, pp. 575-588

  2. We gme P10: Finite cylinder-source model for pile/borehole heat exchangers in multilayered medium

    2nd EAGE Workshop on Geomechanics and Energy: The Ground as Energy Source and Storage, pp. 157-161

2014

  1. A comparative study of the CFD modeling of a ventilated active façade including phase change materials

    Applied Energy, Vol. 126, pp. 307-317

  2. Design of a finned plate latent heat thermal energy storage system for domestic applications

    Energy Procedia, Vol. 48, pp. 300-308

  3. Finite cylinder-source model for energy pile heat exchangers: Effects of thermal storage and vertical temperature variations

    Energy, Vol. 78, pp. 639-648

  4. Parametric study of the operational and economic feasibility of Stirling micro-cogeneration devices in Spain

    Applied Thermal Engineering, Vol. 71, Núm. 2, pp. 821-829

2013

  1. Development and comparative analysis of the modeling of an innovative finned-plate latent heat thermal energy storage system

    Energy, Vol. 58, pp. 438-447

  2. Modelado de un motor Stirling para microcogeneración y validación a partir de datos experimentales

    VIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas

2012

  1. Analysis of a thermal bridge in a guarded hot box testing facility

    Energy and Buildings, Vol. 50, pp. 139-149

  2. Thermoeconomic analysis of a micro-CHP installation in a tertiary sector building through dynamic simulation

    Energy, Vol. 45, Núm. 1, pp. 228-236

2011

  1. Feasibility of small-scale gas engine-based residential cogeneration in Spain

    Energy Policy, Vol. 39, Núm. 6, pp. 3813-3821

  2. Implications of the modelling of stratified hot water storage tanks in the simulation of CHP plants

    Energy Conversion and Management, Vol. 52, Núm. 8-9, pp. 3018-3026