ALVARO CAMPOS CELADOR-rekin lankidetzan egindako argitalpenak (19)

2019

  1. Dynamic neural networks to analyze the behavior of phase change materials embedded in building envelopes

    Applied Thermal Engineering, Vol. 158

2018

  1. A novel correlation for the direct determination of the discharging time of plate-based latent heat thermal energy storage systems

    Applied Thermal Engineering, Vol. 129, pp. 521-534

  2. Ventilation requirements based on carbon dioxide concentration criteria: implications on IAQ and energy use

    International Journal of Ventilation, Vol. 17, Núm. 4, pp. 256-271

2017

  1. A general model for the optimization of energy supply systems of buildings

    Energy, Vol. 138, pp. 954-966

2016

  1. Determination of the phase diagram and main thermophysical properties of the erythritol–urea eutectic mixture for its use as a phase change material

    Solar Energy Materials and Solar Cells, Vol. 157, pp. 894-906

  2. Finite cylinder-source model for energy pile heat exchangers: Effect of buried depth and heat load cyclic variations

    Applied Thermal Engineering, Vol. 96, pp. 130-136

  3. The sodium nitrate–urea eutectic binary mixture as a phase change material for medium temperature thermal energy storage. Part II: Accelerated thermal cycling test and water uptake behavior of the material

    Solar Energy Materials and Solar Cells, Vol. 157, pp. 1076-1083

2015

  1. Influence of the regulation framework on the feasibility of a Stirling engine-based residential micro-CHP installation

    Energy, Vol. 84, pp. 575-588

  2. We gme P10: Finite cylinder-source model for pile/borehole heat exchangers in multilayered medium

    2nd EAGE Workshop on Geomechanics and Energy: The Ground as Energy Source and Storage, pp. 157-161

2014

  1. A comparative study of the CFD modeling of a ventilated active façade including phase change materials

    Applied Energy, Vol. 126, pp. 307-317

  2. Design of a finned plate latent heat thermal energy storage system for domestic applications

    Energy Procedia, Vol. 48, pp. 300-308

  3. Finite cylinder-source model for energy pile heat exchangers: Effects of thermal storage and vertical temperature variations

    Energy, Vol. 78, pp. 639-648

  4. Parametric study of the operational and economic feasibility of Stirling micro-cogeneration devices in Spain

    Applied Thermal Engineering, Vol. 71, Núm. 2, pp. 821-829

2013

  1. Development and comparative analysis of the modeling of an innovative finned-plate latent heat thermal energy storage system

    Energy, Vol. 58, pp. 438-447

  2. Modelado de un motor Stirling para microcogeneración y validación a partir de datos experimentales

    VIII Congreso Nacional de Ingeniería Termodinámica. [Recurso electrónico]: libro de actas

2012

  1. Analysis of a thermal bridge in a guarded hot box testing facility

    Energy and Buildings, Vol. 50, pp. 139-149

  2. Thermoeconomic analysis of a micro-CHP installation in a tertiary sector building through dynamic simulation

    Energy, Vol. 45, Núm. 1, pp. 228-236

2011

  1. Feasibility of small-scale gas engine-based residential cogeneration in Spain

    Energy Policy, Vol. 39, Núm. 6, pp. 3813-3821

  2. Implications of the modelling of stratified hot water storage tanks in the simulation of CHP plants

    Energy Conversion and Management, Vol. 52, Núm. 8-9, pp. 3018-3026