Argitalpenak (151) Ikertzaileren baten partaidetza izan duten argitalpenak

2024

  1. An Antibacklash Method for Wolfrom Reducers

    Mechanisms and Machine Science

  2. An efficient algorithm for the minimal least squares solution of linear systems with indefinite symmetric matrices

    Journal of Computational and Applied Mathematics, Vol. 444

  3. An engineering approach to assess friction torque in generally loaded four-point contact slewing bearings

    Mechanism and Machine Theory, Vol. 192

  4. Confirming dark groove microstructural alterations as WEC initiation first stage in cylindrical roller thrust bearings lubricated with WEC critical oil

    Wear, Vol. 550-551

  5. Experimental Validation of Models for the Structural Simulation of Crossed Roller Wire-Race Bearing

    Mechanisms and Machine Science

  6. Explicit Higher-Order Integrator for Multibody Dynamics

    Mechanisms and Machine Science

2023

  1. A study on the three key concepts of White Etching Crack failure mode in its very early stages - Contrast with different testing methods

    Wear, Vol. 530-531

  2. Effect of Post-Processing Treatment on Fatigue Performance of Ti6Al4V Alloy Manufactured by Laser Powder Bed Fusion

    Journal of Manufacturing and Materials Processing, Vol. 7, Núm. 4

  3. Effects of geometric and assembly errors of angular contact ball bearing spindles on its kinematic motion error

    European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023

  4. Evaluation of Implant Body Diameter, Platform Diameter, and the Use of a Transepithelial Component on Implant-Abutment Connection Microgap: An In Vitro Study with In Situ Hard X-Ray Radiography

    International Journal of Oral and Maxillofacial Implants, Vol. 38, Núm. 3, pp. 489-495

  5. Influencia del recubrimiento Zn-Ni en la resistencia del acero 300M estimada mediante Small Punch Testing

    Revista española de mecánica de la fractura, Núm. 6, pp. 15-20

  6. Microstructure and mechanical properties of two novel scrap tolerant Al65Cu10Mg10Si10Zn5 and Al80Cu5Mg5Si5Zn5 high entropy aluminum alloys

    Intermetallics, Vol. 162

  7. Small Punch Test on Jominy Bars for High-Throughput Characterization of Quenched and Tempered Steel

    Metals, Vol. 13, Núm. 11

  8. Strain Virtual Sensing for Structural Health Monitoring under Variable Loads

    Sensors, Vol. 23, Núm. 10

2022

  1. A non-damped stabilization algorithm for multibody dynamics

    Meccanica, Vol. 57, Núm. 2, pp. 371-399

  2. COrientaciones3d: una biblioteca de funciones para el uso intercambiable de distintos sistemas de representación de la orientación

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

  3. Early stages of subsurface crack and WEC formation in 100Cr6 bearing steel under RCF and hydrogen influence

    International Journal of Fatigue, Vol. 155

  4. Effect of the geometry of butt-joint implant-supported restorations on the fatigue life of prosthetic screws

    Journal of Prosthetic Dentistry, Vol. 127, Núm. 3, pp. 477.e1-477.e9

  5. Fatigue improvement and residual stress relaxation of shot-peened alloy steel DIN 34CrNiMo6 under axial loading

    International Journal of Fatigue, Vol. 162

  6. Solid fraction determination at the rigidity point by advanced thermal analysis

    Applied Sciences (Switzerland), Vol. 12, Núm. 1