Grupo De Análisis Y Diseño Mecánico (GRUPO ADM) - GIC 21/008
Publicaciones (150) Publicaciones en las que ha participado algún/a investigador/a
2024
-
An Antibacklash Method for Wolfrom Reducers
Mechanisms and Machine Science
-
An efficient algorithm for the minimal least squares solution of linear systems with indefinite symmetric matrices
Journal of Computational and Applied Mathematics, Vol. 444
-
An engineering approach to assess friction torque in generally loaded four-point contact slewing bearings
Mechanism and Machine Theory, Vol. 192
-
Experimental Validation of Models for the Structural Simulation of Crossed Roller Wire-Race Bearing
Mechanisms and Machine Science
-
Explicit Higher-Order Integrator for Multibody Dynamics
Mechanisms and Machine Science
2023
-
A study on the three key concepts of White Etching Crack failure mode in its very early stages - Contrast with different testing methods
Wear, Vol. 530-531
-
Effect of Post-Processing Treatment on Fatigue Performance of Ti6Al4V Alloy Manufactured by Laser Powder Bed Fusion
Journal of Manufacturing and Materials Processing, Vol. 7, Núm. 4
-
Effects of geometric and assembly errors of angular contact ball bearing spindles on its kinematic motion error
European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023
-
Evaluation of Implant Body Diameter, Platform Diameter, and the Use of a Transepithelial Component on Implant-Abutment Connection Microgap: An In Vitro Study with In Situ Hard X-Ray Radiography
International Journal of Oral and Maxillofacial Implants, Vol. 38, Núm. 3, pp. 489-495
-
Influencia del recubrimiento Zn-Ni en la resistencia del acero 300M estimada mediante Small Punch Testing
Revista española de mecánica de la fractura, Núm. 6, pp. 15-20
-
Microstructure and mechanical properties of two novel scrap tolerant Al65Cu10Mg10Si10Zn5 and Al80Cu5Mg5Si5Zn5 high entropy aluminum alloys
Intermetallics, Vol. 162
-
Small Punch Test on Jominy Bars for High-Throughput Characterization of Quenched and Tempered Steel
Metals, Vol. 13, Núm. 11
-
Strain Virtual Sensing for Structural Health Monitoring under Variable Loads
Sensors, Vol. 23, Núm. 10
2022
-
A non-damped stabilization algorithm for multibody dynamics
Meccanica, Vol. 57, Núm. 2, pp. 371-399
-
COrientaciones3d: una biblioteca de funciones para el uso intercambiable de distintos sistemas de representación de la orientación
Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)
-
Early stages of subsurface crack and WEC formation in 100Cr6 bearing steel under RCF and hydrogen influence
International Journal of Fatigue, Vol. 155
-
Effect of the geometry of butt-joint implant-supported restorations on the fatigue life of prosthetic screws
Journal of Prosthetic Dentistry, Vol. 127, Núm. 3, pp. 477.e1-477.e9
-
Fatigue improvement and residual stress relaxation of shot-peened alloy steel DIN 34CrNiMo6 under axial loading
International Journal of Fatigue, Vol. 162
-
Solid fraction determination at the rigidity point by advanced thermal analysis
Applied Sciences (Switzerland), Vol. 12, Núm. 1
2021
-
A rubric to assess and improve technical writing in undergraduate engineering courses
Education Sciences, Vol. 11, Núm. 4