ITZIAR
OTAEGI TENA
INVESTIGADOR/A DOCTOR/A
Publicaciones en las que colabora con ITZIAR OTAEGI TENA (19)
2024
-
Production of supertough and semiconductive PLA-based polymer blend nanocomposites by kinetic microstructural control
Polymer, Vol. 296
-
Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer
Polymer Testing, Vol. 130
2023
-
Effect of the Simultaneous Addition of Polycaprolactone and Carbon Nanotubes on the Mechanical, Electrical, and Adhesive Properties of Epoxy Resins Cured with Ionic Liquids
Polymers, Vol. 15, Núm. 7
-
High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer
Macromolecular Materials and Engineering, Vol. 308, Núm. 12
-
Ionic Liquids as Alternative Curing Agents for Conductive Epoxy/CNT Nanocomposites with Improved Adhesive Properties
Nanomaterials, Vol. 13, Núm. 4
-
Mechanical, electrical, and adhesive synergies in melt-processed hybrid bio-based TPU nanocomposites
Polymer Testing, Vol. 124
2022
-
Effect of compatibilizer addition on the surface nucleation of dispersed polyethylene droplets in a self-nucleated polypropylene matrix
Polymer, Vol. 263
-
Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation
ACS Applied Polymer Materials, Vol. 4, Núm. 5, pp. 3369-3379
-
Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation
ACS APPLIED POLYMER MATERIALS
-
Ionic Liquid-Cured Epoxy/PCL Blends with Improved Toughness and Adhesive Properties
Polymers, Vol. 14, Núm. 13
2021
-
Attaining toughness and reduced electrical percolation thresholds in bio‐based pa410 by combined addition of bio‐based thermoplastic elastomers and cnts
Polymers, Vol. 13, Núm. 19
-
Composition dependent miscibility in the crystalline state of polyamide 6 /polyamide 4,10 blends: From single to double crystalline blends
Polymer, Vol. 219
-
Structure and properties of reactively extruded opaque post-consumer recycled PET
Polymers, Vol. 13, Núm. 20
-
Synthesis, structure, crystallization and mechanical properties of isodimorphic PBS-ran-PCL copolyesters
Polymers, Vol. 13, Núm. 14
2020
-
Fully Reversible Spherulitic Morphology in Cationically Photopolymerized DGEBA/PCL Shape-Memory Blends
Macromolecules, Vol. 53, Núm. 4, pp. 1368-1379
-
Jatorri berriztagarriko polimeroetan eta karbono-nanokargetan oinarritutako polimero-nahaste eta nanokonpositeak
Jatorri berriztagarriko polimeroetan eta karbono-nanokargetan oinarritutako polimero-nahaste eta nanokonpositeak
2019
-
The effect of the preparation method and the dispersion and aspect ratio of cnts on the mechanical and electrical properties of bio-based polyamide-4,10/CNT nanocomposites
Polymers, Vol. 11, Núm. 12
-
Using an ionic liquid to reduce the electrical percolation threshold in biobased thermoplastic polyurethane/graphene nanocomposites
Polymers, Vol. 11, Núm. 3
2018
-
Novel biobased polyamide 410/polyamide 6/CNT nanocomposites
Polymers, Vol. 10, Núm. 9