Departamento
Ingeniería Mecánica
Publicaciones (126) Publicaciones en las que ha participado algún/a investigador/a
2023
-
25 Years Working with Green Steel Slag Concrete
Lecture Notes in Civil Engineering
-
42CrMo4 steel flow behavior characterization for high temperature closed dies hot forging in automotive components applications
Heliyon, Vol. 9, Núm. 11
-
A Framework for Climate Resilient Urban Design: The Case of Porte de Montreuil, Paris
Sustainability (Switzerland), Vol. 15, Núm. 18
-
A Low-Cost System Concept for Initial Sonography Training
Mechanisms and Machine Science
-
A Novel Family of 2T2R Parallel Manipulators with Potential for Balance Rehabilitation
Mechanisms and Machine Science
-
A Numerical Study on Phase Transformation and Hardness Evolution During Scanning Induction Hardening
Lecture Notes in Mechanical Engineering
-
A framework for risk assessment
Adapting the Built Environment for Climate Change: Design Principles for Climate Emergencies (Elsevier), pp. 17-36
-
A general automatic method for mechanism optimization based on kinematic constraints and analytical Jacobian matrix
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 237, Núm. 14, pp. 3181-3197
-
A simplified skid resistance predicting model for a freeway network to be used in a pavement management system
International Journal of Pavement Engineering, Vol. 24, Núm. 2
-
A study on the three key concepts of White Etching Crack failure mode in its very early stages - Contrast with different testing methods
Wear, Vol. 530-531
-
ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL
MM Science Journal, Vol. 2023-November, pp. 6901-6908
-
ANALYSIS OF THIN-WALLED COMPONENTS WITH INTERNAL MICROSTRUCTURE DESIGN MANUFACTURED BY LPBF
MM Science Journal, Vol. 2023-November, pp. 6860-6865
-
Accelerated second-order hydrodynamic load calculation on semi-submersible floaters
Marine Structures, Vol. 90
-
Active flow control on airfoils by reinforcement learning
Ocean Engineering, Vol. 287
-
An accuracy evolution method applied to five-axis machining of curved surfaces
International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 7-8, pp. 3475-3487
-
Analysis of the influence of L-PBF porosity on the mechanical behavior of AlSi10Mg by XRCT-based FEM
Journal of Materials Research and Technology, Vol. 22, pp. 958-981
-
Analyzing the influence of dressing parameters on the real depth of cut during rotary dressing of vitrified bonded cbn grinding wheels
Advances in Science and Technology
-
Análisis de la eficacia del panel que indica la velocidad como medida de calmado de tráfico en carreteras de calzada única afectadas por obras
XV Congreso de Ingeniería del Transporte (15º. La Laguna. 2023) (Universidad de La Laguna), pp. 1412-1421
-
Applicability of existing models for the strength development of 3D-printed thixotropic concretes during hardening
Mechanics of Advanced Materials and Structures, Vol. 30, Núm. 3, pp. 510-519
-
Are panels indicating vehicles' speed an efficient traffic calming measure in short urban areas, when they are placed alone?
Transportation Research Procedia