Publicaciones (159) Publicaciones en las que ha participado algún/a investigador/a

2014

  1. A common strategy to extracting cellulose nanoentities from different plants

    Industrial Crops and Products, Vol. 55, pp. 140-148

  2. A comparative study on the effects of material blending method on the physico-mechanical properties of WPCs made from MDF dust

    Journal of Applied Polymer Science, Vol. 131, Núm. 15

  3. A hybrid biological process of indoor air treatment for toluene removal

    Journal of the Air and Waste Management Association, Vol. 64, Núm. 12, pp. 1403-1409

  4. A sustainable process for material removal on pure copper by use of extremophile bacteria

    Journal of Cleaner Production, Vol. 84, Núm. 1, pp. 752-760

  5. Accelerated ageing of an EAF black slag by carbonation and percolation for long-term behaviour assessment

    Journal of Environmental Management, Vol. 140, pp. 45-50

  6. Air pollution abatement: Joint combination of packing materials in biofilters

    Proceedings from the 18th International Congress on Project Management and Engineering: (Alcañiz, July 2014)

  7. Almidoi termoplaskoaren prozesaketa eta karakterizazioa

    II Materialen Zientzia eta Teknologia Kongresua

  8. An empiric model for estimating the effect of inhibitors during the simulation of bioethanol production process

    21st International Congress of Chemical and Process Engineering, CHISA 2014 and 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2014

  9. Analysis of the performance of membrane ultrafiltration in the biorefinery by aspen plus® simulation

    Chemical Engineering Transactions, Vol. 39, Núm. Special Issue, pp. 1711-1716

  10. Analysis of the simultaneous gas-liquid CO2 absorption and liquid-gas NH3 desorption in a hydrometallurgical waelz oxides purification process

    International Journal of Chemical Reactor Engineering, Vol. 12, Núm. 1, pp. 1-14

  11. Antifungal cellulose by capsaicin grafting

    Cellulose, Vol. 21, Núm. 3, pp. 1909-1919

  12. Aqueous-phase catalytic oxidation of furfural with H2O2: High yield of maleic acid by using titanium silicalite-1

    RSC Advances, Vol. 4, Núm. 98, pp. 54960-54972

  13. Assessment of biorefinery process intensification by ultrasound technology

    Clean Technologies and Environmental Policy, Vol. 16, Núm. 7, pp. 1403-1410

  14. Assessment of release from new materials with nanostructured additions in the case of accidental fire in the building sector

    2nd Iberian Meeting on Aerosol Science and Technology: Proceedings Book RICTA 2014

  15. Base catalyzed depolymerization of lignin: Influence of organosolv lignin nature

    Biomass and Bioenergy, Vol. 66, pp. 379-386

  16. Bio-based films prepared with by-products and wastes: Environmental assessment

    Journal of Cleaner Production, Vol. 64, pp. 218-227

  17. Bio-oil production from rice husk fast pyrolysis in a conical spouted bed reactor

    Fuel, Vol. 128, pp. 162-169

  18. Biostability of polyurethanes. Study from the viewpoint of microphase separated structure

    Polymer Degradation and Stability, Vol. 108, pp. 195-200

  19. Block architecture influence on the structure and mechanical performance of drawn polyurethane elastomers

    Polymer International, Vol. 63, Núm. 7, pp. 1278-1287

  20. Blokezko kopolimeroetan oinarritutako funtzio anitzeko material nanoegituratu berriak

    II Materialen Zientzia eta Teknologia Kongresua