Publicaciones (46) Publicaciones en las que ha participado algún/a investigador/a

2008

  1. A draft-tube conical spouted bed for drying fine particles

    Drying Technology, Vol. 26, Núm. 3, pp. 308-314

  2. Adsorption and oxidation of trichloroethylene on Ce/Zr mixed oxides: In situ FTIR and flow studies

    Catalysis Communications, Vol. 9, Núm. 10, pp. 2018-2021

  3. An integral degradation model to describe H2O 2-photooxidation of Linear Alkylbenzenesulfonate (LAS) surfactants

    Journal of Advanced Oxidation Technologies

  4. Analysis of the behaviour of different mixed oxides in the treatment of Cl-VOC containing gas streams

    International Journal of Chemical Reactor Engineering, Vol. 6

  5. Analysis of the combustion of the coke deposited on CuO-ZnO-Al 2O 3/γ-Al 2O 3 bifunctional catalysts

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

  6. Analysis of water transmembrane profiles and ionic transport during proton exchange membrane fuel cell transient behavior

    Industrial and Engineering Chemistry Research, Vol. 47, Núm. 13, pp. 4481-4489

  7. Catalyst effect on the composition of tire pyrolysis products

    Energy and Fuels, Vol. 22, Núm. 5, pp. 2909-2916

  8. Catalytic performance of chlorinated Ce/Zr mixed oxides for Cl-VOC oxidation

    WIT Transactions on Ecology and the Environment, Vol. 109, pp. 857-866

  9. Catalytic pyrolysis of scrap tyres over commercial FCC catalysts

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

  10. Characterization of the radical oxidative level in the degradation of phenolic compounds with H2O2/UV

    Journal of Advanced Oxidation Technologies

  11. Chemical recycling of PET by alkaline hydrolysis in the presence of quaternary phosphonium and ammonium salts as phase transfer catalysts

    WIT Transactions on Ecology and the Environment, Vol. 109, pp. 511-520

  12. Deactivation of a CuO - ZnO - Al2O3/γ-Al 2O3 catalyst in the synthesis of dimethyl ether

    Industrial and Engineering Chemistry Research, Vol. 47, Núm. 7, pp. 2238-2247

  13. Dispersion and holdup in multiphase packed bed microreactors

    Chemical Engineering and Technology, Vol. 31, Núm. 8, pp. 1130-1139

  14. Effect of HZSM-5 zeolite catalysts as additives in the cracking of mixtures of gas-oil and atmospheric residue under FCC conditions

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

  15. Effect of acid catalysts on scrap tyre pyrolysis under fast heating conditions

    Journal of Analytical and Applied Pyrolysis, Vol. 82, Núm. 2, pp. 199-204

  16. Effect of atmospheric residue incorporation in the fluidized catalytic cracking (FCC) feed on product stream yields and composition

    Energy and Fuels, Vol. 22, Núm. 4, pp. 2149-2156

  17. Effect of catalyst properties on the cracking of polypropylene pyrolysis waxes under FCC conditions

    Catalysis Today, Vol. 133-135, Núm. 1-4, pp. 413-419

  18. Effect of the operating conditions in the hydrocracking of pyrolysis gasoline over Pt/acidic support catalyst

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

  19. Effect of the operating conditions on the adsorption of water and methanol over γ-Al 2O 3

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

  20. Electromigration of co-ions and counter-ions through cation exchange membranes

    International Journal of Chemical Reactor Engineering, Vol. 6