Publicaciones (95) Publicaciones de GORKA URBICAIN PELAYO

2024

  1. Effect of V concentration in TiSiN monolayer coating on chip formation mechanism and chip sliding velocity during dry turning of Ti–6Al–4V alloy

    Journal of Materials Research and Technology, Vol. 32, pp. 4456-4464

  2. Enhancement of ceramic tool behaviour with textured grooves during machining of Inconel® 718

    International Journal of Advanced Manufacturing Technology, Vol. 134, Núm. 5-6, pp. 2955-2968

  3. Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L

    Tribology International, Vol. 193

  4. Influence of the cutting-edge preparation in ceramic tools for grooving of Inconel® 718 and force prediction

    Engineering Science and Technology, an International Journal, Vol. 54

  5. Instantaneous contact area-based model for shear strength sensitive cutting coefficients characterization of anisotropic parts

    Engineering Science and Technology, an International Journal, Vol. 52

2023

  1. ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL

    MM Science Journal, Vol. 2023-November, pp. 6901-6908

  2. Influencia del ángulo de posición en el diseño del rompevirutas:: Estudio de herramientas de torneado dinámico y de alto avance en inconel® 718

    Revista DYNA, Vol. 98, Núm. 4, pp. 406-412

  3. Investigating the effect of novel self-lubricant TiSiVN films on topography, diffusion and oxidation phenomenon at the chip-tool interface during dry machining of Ti-6Al-4V alloy

    Tribology International, Vol. 186

  4. Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy

    Wear, Vol. 532-533

  5. On the effects of cutting-edge angle on high-feed turning of Inconel 718© superalloy

    International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 9-10, pp. 4237-4252

  6. Prediction of cutting forces including tool wear in high-feed turning of Nimonic® C-263 superalloy: A geometric distortion-based model

    Measurement: Journal of the International Measurement Confederation, Vol. 211

  7. Special Issue on Machining systems and signal processing: Advancing machining processes through algorithms, sensors and devices

    Mechanical Systems and Signal Processing

2022

  1. Stiffening near-net-shape functional parts of Inconel 718 LPBF considering material anisotropy and subsequent machining issues

    Mechanical Systems and Signal Processing, Vol. 168

  2. Using Machine-Learning techniques and Virtual Reality to design cutting tools for energy optimization in milling operations

    International Journal of Computer Integrated Manufacturing, Vol. 35, Núm. 9, pp. 951-971

2021

  1. Bridging the gap between student instruction and advanced research: Educational software tool for manufacturing learning

    Computer Applications in Engineering Education, Vol. 29, Núm. 1, pp. 274-286

  2. Milling force model for asymmetric end-mills during high-feed milling on AISI-P20

    Materials and Manufacturing Processes, Vol. 36, Núm. 15, pp. 1761-1768

  3. On the relationship between cutting forces and anisotropy features in the milling of LPBF Inconel 718 for near net shape parts

    International Journal of Machine Tools and Manufacture, Vol. 170

  4. Position-oriented process monitoring in milling of thin-walled parts

    Journal of Manufacturing Systems, Vol. 60, pp. 360-372

  5. Surface roughness prediction with new barrel-shape mills considering runout: Modelling and validation

    Measurement: Journal of the International Measurement Confederation, Vol. 173

  6. Turning Process with Ceramic Inserts of ADI Cast Material, Surface Analysis

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25