MIKEL
ABASOLO BILBAO
PROFESORADO TITULAR DE UNIVERSIDAD
Publications (53) MIKEL ABASOLO BILBAO publications
2024
-
A New Critical Plane Multiaxial Fatigue Criterion with an Exponent to Account for High Mean Stress Effect
Metals, Vol. 14, Núm. 9
-
Comparative analysis of Direct Energy Deposition parameters for Ti-6Al-4V using laser beam and coaxial wire (DED-LB/CW)
Procedia CIRP
-
Multiaxial fatigue life assessment of dental implants
Heliyon, Vol. 10, Núm. 19
2023
-
Evaluation of Implant Body Diameter, Platform Diameter, and the Use of a Transepithelial Component on Implant-Abutment Connection Microgap: An In Vitro Study with In Situ Hard X-Ray Radiography
International Journal of Oral and Maxillofacial Implants, Vol. 38, Núm. 3, pp. 489-495
2022
-
Effect of the geometry of butt-joint implant-supported restorations on the fatigue life of prosthetic screws
Journal of Prosthetic Dentistry, Vol. 127, Núm. 3, pp. 477.e1-477.e9
2021
-
Efficient Finite Element modelling of crossed roller wire race slewing bearings
Tribology International, Vol. 161
-
Fatigue performance of prosthetic screws used in dental implant restorations: Rolled versus cut threads
Journal of Prosthetic Dentistry, Vol. 126, Núm. 3, pp. 406.e1-406.e8
2020
-
Achieving uniform thread load distribution in bolted joints using different pitch values
Mechanics and Industry, Vol. 21, Núm. 6
-
Fatigue design of dental implant assemblies: A nominal stress approach
Metals, Vol. 10, Núm. 6
-
On the use of a simplified slip limit equation to predict screw self-loosening of dental implants subjected to external cycling loading
Applied Sciences (Switzerland), Vol. 10, Núm. 19, pp. 1-16
-
Structural modeling of crossed roller wire race bearings: Analytical submodel for the roller-wire-ring set
Tribology International, Vol. 151
-
Study of bolt load scatter due to tightening sequence
International Journal of Pressure Vessels and Piping, Vol. 182
2019
-
An engineering approach for the estimation of slewing bearing stiffness in wind turbine generators
Wind Energy, Vol. 22, Núm. 3, pp. 376-391
-
Analytical Model for the Estimation of Axial Stiffness and Contact Results in Wire Race Ball Bearings
Mechanisms and Machine Science (Springer Netherlands), pp. 3873-3882
-
Design of an innovative fatigue test bench for dental implants
Mechanisms and Machine Science (Springer Netherlands), pp. 103-111
-
Generalization of the tetraparametric assembly method for the optimization of bolt tightening sequences in ring-type joints
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 233, Núm. 5, pp. 991-1000
-
Inspection scheduling based on reliability updating of gas turbine welded structures
Advances in Mechanical Engineering, Vol. 11, Núm. 1
-
Load distribution and friction torque in four-point contact slewing bearings considering manufacturing errors and ring flexibility
Mechanism and Machine Theory, Vol. 137, pp. 23-36
-
Load distribution in four-point contact slewing bearings considering manufacturing errors and ring flexibility
Mechanisms and Machine Science (Springer Netherlands), pp. 267-274
-
Static structural behaviour of wire bearings under axial load: Comparison with conventional bearings and study of design and operational parameters
Mechanism and Machine Theory, Vol. 132, pp. 98-107