Publicaciones (50) Publicaciones de MIKEL ABASOLO BILBAO

2023

  1. Evaluation of Implant Body Diameter, Platform Diameter, and the Use of a Transepithelial Component on Implant-Abutment Connection Microgap: An In Vitro Study with In Situ Hard X-Ray Radiography

    International Journal of Oral and Maxillofacial Implants, Vol. 38, Núm. 3, pp. 489-495

2022

  1. Effect of the geometry of butt-joint implant-supported restorations on the fatigue life of prosthetic screws

    Journal of Prosthetic Dentistry, Vol. 127, Núm. 3, pp. 477.e1-477.e9

2021

  1. Efficient Finite Element modelling of crossed roller wire race slewing bearings

    Tribology International, Vol. 161

  2. Fatigue performance of prosthetic screws used in dental implant restorations: Rolled versus cut threads

    Journal of Prosthetic Dentistry, Vol. 126, Núm. 3, pp. 406.e1-406.e8

2020

  1. Achieving uniform thread load distribution in bolted joints using different pitch values

    Mechanics and Industry, Vol. 21, Núm. 6

  2. Fatigue design of dental implant assemblies: A nominal stress approach

    Metals, Vol. 10, Núm. 6

  3. On the use of a simplified slip limit equation to predict screw self-loosening of dental implants subjected to external cycling loading

    Applied Sciences (Switzerland), Vol. 10, Núm. 19, pp. 1-16

  4. Structural modeling of crossed roller wire race bearings: Analytical submodel for the roller-wire-ring set

    Tribology International, Vol. 151

  5. Study of bolt load scatter due to tightening sequence

    International Journal of Pressure Vessels and Piping, Vol. 182

2019

  1. An engineering approach for the estimation of slewing bearing stiffness in wind turbine generators

    Wind Energy, Vol. 22, Núm. 3, pp. 376-391

  2. Analytical Model for the Estimation of Axial Stiffness and Contact Results in Wire Race Ball Bearings

    Mechanisms and Machine Science (Springer Netherlands), pp. 3873-3882

  3. Design of an innovative fatigue test bench for dental implants

    Mechanisms and Machine Science (Springer Netherlands), pp. 103-111

  4. Generalization of the tetraparametric assembly method for the optimization of bolt tightening sequences in ring-type joints

    Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 233, Núm. 5, pp. 991-1000

  5. Inspection scheduling based on reliability updating of gas turbine welded structures

    Advances in Mechanical Engineering, Vol. 11, Núm. 1

  6. Load distribution and friction torque in four-point contact slewing bearings considering manufacturing errors and ring flexibility

    Mechanism and Machine Theory, Vol. 137, pp. 23-36

  7. Load distribution in four-point contact slewing bearings considering manufacturing errors and ring flexibility

    Mechanisms and Machine Science (Springer Netherlands), pp. 267-274

  8. Static structural behaviour of wire bearings under axial load: Comparison with conventional bearings and study of design and operational parameters

    Mechanism and Machine Theory, Vol. 132, pp. 98-107

  9. Wire twisting stiffness modelling with application in wire race ball bearings. Derivation of analytical formula and finite element validation

    Mechanism and Machine Theory, Vol. 140, pp. 1-9

2018

  1. An efficient LDU algorithm for the minimal least squares solution of linear systems

    Journal of Computational and Applied Mathematics, Vol. 344, pp. 346-355

  2. Efficient assembly of bolted joints under external loads using numerical FEM

    International Journal of Mechanical Sciences, Vol. 142-143, pp. 575-582