Publicaciones (148) Publicaciones de MANUEL TELLO LEON

2020

  1. Isothermal oxidation kinetics of nitrided Ti-6Al-4V studied by infrared emissivity

    Corrosion Science, Vol. 173

2019

  1. Evolution of the infrared emissivity of Ni during thermal oxidation until oxide layer opacity

    Infrared Physics and Technology, Vol. 97, pp. 270-276

  2. Infrared emissivity of copper-alloyed spinel black coatings for concentrated solar power systems

    Solar Energy Materials and Solar Cells, Vol. 200

  3. Round Robin Test for the comparison of spectral emittance measurement apparatuses

    Solar Energy Materials and Solar Cells, Vol. 191, pp. 476-485

  4. Thermal radiative properties of electron-beam-melted and mechanically alloyed V-4Cr-4Ti based alloys between 200 and 750 °C

    Journal of Nuclear Materials, Vol. 513, pp. 86-93

2018

  1. Sensitivity of thermal emission spectroscopy for the study of structural phase transitions

    Infrared Physics and Technology, Vol. 93, pp. 16-19

2017

  1. IR radiometer sensitivity and accuracy improvement by eliminating spurious radiation for emissivity measurements on highly specular samples in the 2–25 μm spectral range

    Measurement: Journal of the International Measurement Confederation, Vol. 110, pp. 22-26

  2. Mid-infrared optical properties of pyrolytic boron nitride in the 390–1050 °C temperature range using spectral emissivity measurements

    Journal of Quantitative Spectroscopy and Radiative Transfer, Vol. 194, pp. 1-6

  3. Thermal cycling testing of Zn–Mg–Al eutectic metal alloys as potential high-temperature phase change materials for latent heat storage

    Journal of Thermal Analysis and Calorimetry, Vol. 129, Núm. 2, pp. 885-894

  4. Zinc-rich eutectic alloys for high energy density latent heat storage applications

    Journal of Alloys and Compounds, Vol. 705, pp. 714-721

2016

  1. Experimental investigation of Mg-Zn-Al metal alloys for latent heat storage application

    Journal of Alloys and Compounds, Vol. 685, pp. 724-732

  2. Generating and characterizing the mechanical properties of cell-derived matrices using atomic force microscopy

    Methods, Vol. 94, pp. 85-100

  3. Thermal emissivity spectra and structural phase transitions of the eutectic Mg-51%Zn alloy: A candidate for thermal energy storage

    Journal of Alloys and Compounds, Vol. 684, pp. 62-67

  4. Thermo-radiative and optical properties of a cutting tool based on polycrystalline cubic boron nitride (PCBN)

    Materials Research Express, Vol. 3, Núm. 4

2015

  1. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating

    Solar Energy Materials and Solar Cells, Vol. 140, pp. 249-252

  2. Mg-Zn-Al Eutectic Alloys as Phase Change Material for Latent Heat Thermal Energy Storage

    Energy Procedia

2014

  1. Corrigendum to "Thermophysical characterization of Mg-51%Zn eutectic metal alloy: A phase change material for thermal energy storage in direct steam generation applications"

    Energy

  2. Optical properties of metals: Infrared emissivity in the anomalous skin effect spectral region

    Journal of Applied Physics, Vol. 116, Núm. 9

  3. Spectral emissivity of copper and nickel in the mid-infrared range between 250 and 900 C

    International Journal of Heat and Mass Transfer, Vol. 71, pp. 549-554

  4. Thermodynamic study of the eutectic Mg49-Zn51 alloy used for thermal energy storage

    Journal of Thermal Analysis and Calorimetry, Vol. 117, Núm. 1, pp. 93-99