Publicaciones en las que colabora con MANUEL TELLO LEON (16)

2020

  1. Isothermal oxidation kinetics of nitrided Ti-6Al-4V studied by infrared emissivity

    Corrosion Science, Vol. 173

2019

  1. Evolution of the infrared emissivity of Ni during thermal oxidation until oxide layer opacity

    Infrared Physics and Technology, Vol. 97, pp. 270-276

  2. Infrared emissivity of copper-alloyed spinel black coatings for concentrated solar power systems

    Solar Energy Materials and Solar Cells, Vol. 200

  3. Round Robin Test for the comparison of spectral emittance measurement apparatuses

    Solar Energy Materials and Solar Cells, Vol. 191, pp. 476-485

  4. Thermal radiative properties of electron-beam-melted and mechanically alloyed V-4Cr-4Ti based alloys between 200 and 750 °C

    Journal of Nuclear Materials, Vol. 513, pp. 86-93

2018

  1. Sensitivity of thermal emission spectroscopy for the study of structural phase transitions

    Infrared Physics and Technology, Vol. 93, pp. 16-19

2017

  1. IR radiometer sensitivity and accuracy improvement by eliminating spurious radiation for emissivity measurements on highly specular samples in the 2–25 μm spectral range

    Measurement: Journal of the International Measurement Confederation, Vol. 110, pp. 22-26

  2. Mid-infrared optical properties of pyrolytic boron nitride in the 390–1050 °C temperature range using spectral emissivity measurements

    Journal of Quantitative Spectroscopy and Radiative Transfer, Vol. 194, pp. 1-6

2016

  1. Thermal emissivity spectra and structural phase transitions of the eutectic Mg-51%Zn alloy: A candidate for thermal energy storage

    Journal of Alloys and Compounds, Vol. 684, pp. 62-67

  2. Thermo-radiative and optical properties of a cutting tool based on polycrystalline cubic boron nitride (PCBN)

    Materials Research Express, Vol. 3, Núm. 4

2015

  1. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating

    Solar Energy Materials and Solar Cells, Vol. 140, pp. 249-252

2014

  1. Optical properties of metals: Infrared emissivity in the anomalous skin effect spectral region

    Journal of Applied Physics, Vol. 116, Núm. 9

  2. Spectral emissivity of copper and nickel in the mid-infrared range between 250 and 900 C

    International Journal of Heat and Mass Transfer, Vol. 71, pp. 549-554

2013

  1. Experimental verification of the anomalous skin effect in copper using emissivity measurements

    Applied Physics Letters, Vol. 102, Núm. 24

  2. First spectral emissivity study of a solar selective coating in the 150-600°C temperature range

    Solar Energy Materials and Solar Cells, Vol. 117, pp. 390-395

1995

  1. A specific heat study on the phase transitions in Cs2ZnI4 below room temperature

    Journal of Physics: Condensed Matter, Vol. 7, Núm. 38, pp. 7481-7487