Publicaciones (758) Publicaciones en las que ha participado algún/a investigador/a

2022

  1. 5-axis double-flank CNC machining of spiral bevel gears via custom-shaped tools—Part II: physical validations and experiments

    International Journal of Advanced Manufacturing Technology, Vol. 119, Núm. 3-4, pp. 1647-1658

  2. A collaborative approach for the effective training of engineers in Metal Additive Manufacturing for the die and mould sector

    Proceedings of the 2022 31st Annual Conference of the European Association for Education in Electrical and Information Engineering, EAEEIE 2022

  3. Analysis of the subject starting point and aspects for improvement based on the results of the student surveys

    15th annual International Conference of Education, Research and Innovation, 7-9 November 2022, Seville, Spain

  4. Application of active methodologies in the descriptive subject of ‘Mechanical Technology’

    15th annual International Conference of Education, Research and Innovation, 7-9 November 2022, Seville, Spain

  5. CFD simulation for the modelling of the powder flow on continuous coaxial nozzles in the laser DED process

    Procedia CIRP

  6. CT-based traceable interface area detection in Al7075-T6 adhesive bonded structures

    European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 22nd International Conference and Exhibition, EUSPEN 2022

  7. Comparison of dry and liquid carbon dioxide cutting conditions based on machining performance and life cycle assessment for end milling GFRP

    International Journal of Advanced Manufacturing Technology, Vol. 122, Núm. 2, pp. 821-833

  8. Conceiving a Digital Twin for a Flexible Manufacturing System

    Applied Sciences (Switzerland), Vol. 12, Núm. 19

  9. Deep Learning-Based Feature Extraction of Acoustic Emission Signals for Monitoring Wear of Grinding Wheels

    Sensors, Vol. 22, Núm. 18

  10. Effect of Heat Treatment on the Microstructure and Hardness of Ni-Based Alloy 718 in a Variable Thickness Geometry Deposited by Powder fed Directed Energy Deposition

    Metals, Vol. 12, Núm. 6

  11. Empirical modeling of residual stress profiles in Ti6Al4V after face-milling

    Procedia CIRP

  12. Enhancement of cutting capacity of slender turning tools by means of mode coupling between tools

    Proceedings of ISMA 2022 - International Conference on Noise and Vibration Engineering and USD 2022 - International Conference on Uncertainty in Structural Dynamics

  13. Enhancing hardness in overlapping scanner-based laser area of carbon and tool steel by multi-pin ultrasonic impact peening

    Lasers in Manufacturing and Materials Processing, Vol. 9, Núm. 3, pp. 292-311

  14. Estimación De La Incertidumbre De Medida Bajo Condiciones “on Shop Floor” En Centro De Mecanizado De Cinco Ejes

    XV Congreso Iberoamericano de Ingeniería Mecánica-CIBIM 2022. UPM-España

  15. Estimation of Drag Finishing Abrasive Effect for Cutting Edge Preparation in Broaching Tool

    Materials, Vol. 15, Núm. 15

  16. Experimental Investigations and Optimization of WEDM Parameters Using Taguchi Analysis of Pure Titanium

    Lecture Notes in Intelligent Transportation and Infrastructure (Springer Nature), pp. 349-358

  17. Hybrid manufacturing of complex components: Full methodology including laser metal deposition (LMD) module development, cladding geometry estimation and case study validation

    Mechanical Systems and Signal Processing, Vol. 179

  18. Impact of cutting fluid on hybrid manufacturing of AISI H13 tool steel

    Rapid Prototyping Journal, Vol. 28, Núm. 5, pp. 933-944

  19. Implementation of Passing Vehicle Search Algorithm for Optimization of WEDM Process of Nickel-Based Superalloy Waspaloy

    Nanomaterials, Vol. 12, Núm. 24

  20. Induction heating modeling for tempering of low alloy steels

    27th IFHTSE Congress and European Conference on Heat Treatment 2022