Aitor Larrañaga Varga-rekin lankidetzan egindako argitalpenak (44)

2020

  1. The relationship of destinezite to the acid sulfate alteration at the El Laco magnetite deposit, Chile

    American Mineralogist, Vol. 105, Núm. 6, pp. 860-872

2019

  1. Comparison of the thermal resistance behaviour of synthesized Ln4Al2O9 (Ln = Y, Sm, Eu, Gd, Tb) materials vs commercial Zr0.8Y0.2O1.9 (8YSZ)

    Surface and Coatings Technology, Vol. 374, pp. 745-751

  2. Los servicios generales de investigación (sgiker) de la UPV/EU impulsan la generación de vocaciones científicas entre el alumnado de primaria

    Evaluación de la calidad de la investigación y de la educación superior: XVI FECIES. Libro de actas

  3. SOFC cathodic layers using wet powder spraying technique with self synthesized nanopowders

    International Journal of Hydrogen Energy, Vol. 44, Núm. 14, pp. 7555-7563

  4. Synthesis of new Ln4(Al2O6F2)O2 (Ln = Sm, Eu, Gd) phases with a cuspidine-related structure

    IUCrJ, Vol. 6, pp. 128-135

2018

  1. Characterization of Ln4Al2O9 (Ln=Y, Sm, Eu, Gd, Tb) rare-earth aluminates as novel high-temperature barrier materials

    Ceramics International, Vol. 44, Núm. 8, pp. 8761-8767

  2. Combustion synthesis and characterization of Ln1−xMxCr0.9Ni0.1O3 (Ln = La and/or Nd; M = Sr and/or Ca; x ≤ 0.25) perovskites for SOFCs anodes

    Ceramics International, Vol. 44, Núm. 2, pp. 2240-2248

2017

  1. Designing multifunctional pigments for an improved energy efficiency in buildings

    Energy and Buildings, Vol. 147, pp. 9-13

  2. Effect of the synthesis conditions on the properties of La0.15Sm0.35Sr0.08Ba0.42FeO3 − δ cathode material for SOFCs

    Powder Technology, Vol. 322, pp. 131-139

  3. Scalable synthetic method for SOFC compounds

    Solid State Ionics, Vol. 313, pp. 52-57

2016

  1. Effect of synthesis conditions on electrical and catalytical properties of perovskites with high value of A-site cation size mismatch

    International Journal of Hydrogen Energy, Vol. 41, Núm. 43, pp. 19810-19818

  2. Evaluation of Using LaNi0.6Fe0.4O3– δ Contact Layer Between La0.6Sr0.4FeO3 Cathode and Crofer22APU Interconnect for Solid Oxide Fuel Cells

    Fuel Cells, Vol. 16, Núm. 3, pp. 330-339

  3. Femtosecond laser micromachining of metallic/ceramic composite material for solid oxide fuel cell devices

    International Journal of Hydrogen Energy, Vol. 41, Núm. 38, pp. 17053-17063

  4. Preparation and characterization of high NIR reflective pigments based in ultramarine blue

    Energy and Buildings, Vol. 126, pp. 170-176

  5. Synthesis method dependence of the lattice effects in Ln0.5M0.5FeO3 perovskites (Ln=La and (Nd or Gd);M=Ba and (Ca or Sr))

    Materials Research Express, Vol. 3, Núm. 5

2015

  1. Characterization of LaNi0.6Fe0.4O3 perovskite synthesized by glycine-nitrate combustion method

    Solid State Ionics, Vol. 269, pp. 24-29

  2. Evaluation of using protective/conductive coating on Fe-22Cr mesh as a composite cathode contact material for intermediate solid oxide fuel cells

    International Journal of Hydrogen Energy, Vol. 40, Núm. 14, pp. 4804-4818

  3. Laser machining of LaNi0.6M0.4O3-δ (M: Co, Fe) dip-coated on a Fe-22Cr mesh material to obtain a new contact coating for SOFC: Interaction between Crofer22APU interconnect and La0.6Sr0.4FeO3 cathode

    International Journal of Hydrogen Energy, Vol. 40, Núm. 26, pp. 8407-8418

  4. Metallic/Ceramic (Fe-22Cr mesh/LaNi0.6Fe0.4O3-δ) Composite as Contact Material for SOFCs

    ECS Transactions

2014

  1. Effects of synthesis conditions on the structural, stability and ion conducting properties of Li0.30(La0.50Ln 0.50)0.567TiO3 (Ln=La, Pr, Nd) solid electrolytes for rechargeable lithium batteries

    Ceramics International, Vol. 40, Núm. 6, pp. 8761-8768