Publicaciones en colaboración con investigadoras/es de Tecnalia (26)

2023

  1. Ammonium polyphosphate-melamine synergies in thermal degradation and smoke toxicity of flexible polyurethane foams

    Thermochimica Acta, Vol. 726

2021

  1. Novel predictive methodology of amorphisation of gas-atomised Fe-Si-B alloy powders

    Journal of Non-Crystalline Solids, Vol. 574

2019

  1. Modelling and control of the microstructure of comb-like poly(MAA-: Co-PEGMA) water-soluble copolymers

    Polymer Chemistry, Vol. 10, Núm. 8, pp. 1000-1009

  2. Nucleation and crystallization of PA6 composites prepared by T-RTM: Effects of carbon and glass fiber loading

    Polymers, Vol. 11, Núm. 10

2018

  1. In situ monitoring of isophorone diisocyanate-based flexible polyurethane foams formation

    Journal of Cellular Plastics, Vol. 54, Núm. 1, pp. 37-52

  2. Thermal and fire behavior of isophorone diisocyanate based polyurethane foams containing conventional flame retardants

    Journal of Applied Polymer Science, Vol. 135, Núm. 10

2016

  1. Organic-acid mediated bulk polymerization of ε-caprolactam and its copolymerization with ε-caprolactone

    Journal of Polymer Science, Part A: Polymer Chemistry, Vol. 54, Núm. 15, pp. 2394-2402

2012

  1. Analysis of the conditions to manufacture a MWCNT buckypaper/benzoxazine nanocomposite

    Composites Science and Technology, Vol. 72, Núm. 4, pp. 489-497

  2. Curing of epoxy/carbon nanotubes physical networks

    Polymer Engineering and Science, Vol. 52, Núm. 3, pp. 663-670

  3. Novel bituminous mastics for pavements with improved fire performance

    Construction and Building Materials, Vol. 30, pp. 650-656

2011

  1. Effect of hydration on the dielectric properties of C-S-H gel

    Journal of Chemical Physics, Vol. 134, Núm. 3

2010

  1. Specific rheological and electrical features of carbon nanotube dispersions in an epoxy matrix

    Composites Science and Technology, Vol. 70, Núm. 5, pp. 879-884

2009

  1. Comparison of synthetic procedures for the preparation of sol-gel derived phenoxy-silica hybrid materials

    Journal of Sol-Gel Science and Technology, Vol. 49, Núm. 1, pp. 19-28

2007

  1. Silicate chain formation in the nanostructure of cement-based materials

    Journal of Chemical Physics, Vol. 127, Núm. 16

2006

  1. Novel dynamic viscoelastic measurements of polyurethane copolymer melts and their implication to tack results

    Macromolecular Materials and Engineering, Vol. 291, Núm. 10, pp. 1194-1200

2005

  1. Basic rheological features of block polyurethane solutions: Entanglements, crystallization, and gelation

    Journal of Rheology, Vol. 49, Núm. 1, pp. 313-325

  2. Gelation of thermoplastic polyurethane/2-butanone solutions

    E-Polymers, pp. 1-7

2001

  1. Rheological study of waste porcelain feedstocks for injection moulding

    Journal of the European Ceramic Society, Vol. 21, Núm. 16, pp. 2843-2853

2000

  1. A Rheological Study of Porcelain Feedstock for Injection Moulding

    InterCeram: International Ceramic Review, Vol. 49, Núm. 6, pp. 428-436

1999

  1. Structural and magnetic properties of sintered Sr-ferrites fabricated by powder injection molding

    Journal of Magnetism and Magnetic Materials, Vol. 203, Núm. 1-3, pp. 165-168