Publicaciones en las que colabora con NEREA CASADO PEREZ (42)

2024

  1. Biobased Acrylic Latexes/Sodium Carboxymethyl Cellulose Aqueous Binders for Lithium-Ion NMC 811 Cathodes

    ACS Applied Polymer Materials, Vol. 6, Núm. 2, pp. 1236-1244

  2. Eutectogels as a Semisolid Electrolyte for Organic Electrochemical Transistors

    Chemistry of Materials, Vol. 36, Núm. 4, pp. 1841-1854

  3. Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels

    Macromolecular Rapid Communications, Vol. 45, Núm. 1

  4. Versatile mixed ionic-electronic conducting binders for high-power, high-energy batteries

    Electrochimica Acta, Vol. 474

2023

  1. All-in-one dual responsive hydrogels for thermoelectrochromic (TEC) devices

    Solar Energy Materials and Solar Cells, Vol. 259

  2. Carrageenans as Sustainable Water-Processable Binders for High-Voltage NMC811 Cathodes

    ACS Applied Energy Materials, Vol. 6, Núm. 16, pp. 8616-8625

  3. Current Trends and Perspectives of Polymers in Batteries

    Macromolecules

  4. Direct ink writing of PEDOT eutectogels as substrate-free dry electrodes for electromyography

    Materials Horizons, Vol. 10, Núm. 7, pp. 2516-2524

  5. Fluorine-Free Poly(ionic Liquid)s Binders for the Aqueous Processing of High-Voltage NMC811 Cathodes

    Advanced Energy and Sustainability Research, Vol. 4, Núm. 12

  6. High-performance pyrrolidinium-based poly(ionic liquid) binders for Li-ion and Li-air batteries

    Materials Today Chemistry, Vol. 27

  7. Lithium Borate Ionic Liquids as Single-Component Electrolytes for Batteries

    Advanced Energy Materials, Vol. 13, Núm. 1

  8. PEDOT:PSS-based screen-printable inks for H2O2 electrochemical detection

    Electrochimica Acta, Vol. 439

  9. Poly(diallylmethylammonium) proton conducting membranes with high ionic conductivity at intermediate temperatures

    Polymer, Vol. 280

  10. Unraveling the Influence of Li+-cation and TFSI−-anion in Poly(ionic liquid) Binders for Lithium-Metal Batteries

    Batteries and Supercaps, Vol. 6, Núm. 3

2022

  1. Electroactive 3D printable poly(3,4-ethylenedioxythiophene)-: Graft -poly(ϵ-caprolactone) copolymers as scaffolds for muscle cell alignment

    Polymer Chemistry, Vol. 13, Núm. 1, pp. 109-120

  2. Injectable PEDOT:PSS/cholinium ionic liquid mixed conducting materials for electrocardiogram recordings

    Journal of Materials Chemistry C, Vol. 10, Núm. 40, pp. 15186-15193

  3. Inkjet-Printed Dual-Mode Electrochromic and Electroluminescent Displays Incorporating Ecofriendly Materials

    ACS Applied Materials and Interfaces, Vol. 14, Núm. 38, pp. 43568-43575

  4. Mixed Ionic and Electronic Conducting Eutectogels for 3D-Printable Wearable Sensors and Bioelectrodes

    Advanced Materials Technologies, Vol. 7, Núm. 10

  5. Single-Ion Lithium Conducting Polymers with High Ionic Conductivity Based on Borate Pendant Groups

    Angewandte Chemie - International Edition, Vol. 61, Núm. 7

2021

  1. Chapter 1: Introduction to Redox Polymers: Classification, Characterization Methods and Main Applications

    RSC Polymer Chemistry Series (Royal Society of Chemistry), pp. 1-26