Publications in collaboration with researchers from Universidad Pública de Navarra (22)

2024

  1. A Methodology to Optimize Natural By-Product Mixes for Rammed Earth Construction Based on the Taguchi Method

    Applied Sciences (Switzerland), Vol. 14, Núm. 22

  2. A Vasconic inscription on a bronze hand: Writing and rituality in the Iron Age Irulegi settlement in the Ebro Valley

    Antiquity, Vol. 98, Núm. 397, pp. 66-84

2022

  1. Sulphate soil stabilisation with magnesium binders for road subgrade construction

    International Journal of Pavement Engineering, Vol. 23, Núm. 6, pp. 1840-1850

  2. Vermicomposting of Lavender Waste: A Biological Laboratory Investigation

    Agronomy, Vol. 12, Núm. 12

2021

  1. Stabilization of a clay soil using cementing material from spent refractories and ground-granulated blast furnace slag

    Sustainability (Switzerland), Vol. 13, Núm. 6

  2. Valorization of insulation cellulose waste as solid biomass fuel

    Applied Sciences (Switzerland), Vol. 11, Núm. 17

2020

  1. Characterization of fresh and cured properties of polymer concretes based on two metallurgicalwastes

    Applied Sciences (Switzerland), Vol. 10, Núm. 3

  2. Durability of polyester polymer concretes based on metallurgical wastes for the manufacture of construction and building products

    Construction and Building Materials, Vol. 240

  3. Evaluation of Terrestrial Laser Scanner and Structure from Motion photogrammetry techniques for quantifying soil surface roughness parameters over agricultural soils

    Earth Surface Processes and Landforms, Vol. 45, Núm. 3, pp. 605-621

  4. The Importance of 3D Scanned Mesh Processing in FEM Simulation Results

    Lecture Notes in Mechanical Engineering

  5. The Importance of 3D scanned mesh processing in FEM simulation results

    Advances in Design Engineering: proceedings of the XXIX International Congress INGEGRAF. 20-21 June 2019, Logroño, Spain

2018

  1. On the influence of spatial resolution in soil surface roughness characterization using tls and SFM techniques

    International Geoscience and Remote Sensing Symposium (IGARSS)

2017

  1. Estimated and real durability of unfired clay bricks: Determining factors and representativeness of the laboratory tests

    Construction and Building Materials, Vol. 131, pp. 600-605

  2. Sulfate soils stabilization with magnesium-based binders

    Applied Clay Science, Vol. 135, pp. 457-464

2013

  1. The importance of geometry combined with new techniques for augmented reality

    Procedia Computer Science

2012

  1. Adsorbed liposome deformation studied with quartz crystal microbalance

    Journal of Chemical Physics, Vol. 136, Núm. 8

2011

  1. Stabilization of expansive soils for use in construction

    Applied Clay Science, Vol. 51, Núm. 3, pp. 348-352

  2. The use of non-conventional additives in Marls stabilization

    Applied Clay Science, Vol. 51, Núm. 4, pp. 419-423

2007

  1. Assessing building displacement with GPS

    Building and Environment, Vol. 42, Núm. 1, pp. 393-399

2005

  1. Crystallinity and mechanical properties of optically pure polylactides and their blends

    Polymer Engineering and Science, Vol. 45, Núm. 5, pp. 745-753