Saila
Ingeniaritza Mekanikoa
Argitalpenak (88) Ikertzaileren baten partaidetza izan duten argitalpenak
2019
-
A free navigation of an AGV to a non-static target with obstacle avoidance
Electronics (Switzerland), Vol. 8, Núm. 2
-
A methodology to achieve the set of operation modes of reconfigurable parallel manipulators
Meccanica, Vol. 54, Núm. 15, pp. 2507-2520
-
A methodology to evaluate the reliability impact of the replacement of welded components by additive manufacturing spare parts
Metals, Vol. 9, Núm. 9
-
A novel experimental procedure to determine the cohesive law in ENF tests
Composites Science and Technology, Vol. 170, pp. 42-50
-
A plain linear rule for fatigue analysis under natural loading considering the coupled fatigue and corrosion effect
International Journal of Fatigue, Vol. 122, pp. 141-151
-
A quick cycle time sensitivity analysis of boron steel hot stamping
Metals, Vol. 9, Núm. 2
-
Accuracy and surface quality improvements in the manufacturing of Ti-6Al-4V parts using hot single point incremental forming
Metals, Vol. 9, Núm. 6
-
Actively lubricated hybrid journal bearings based on magnetic fluids for high-precision spindles of machine tools
Journal of Intelligent Material Systems and Structures, Vol. 30, Núm. 15, pp. 2257-2271
-
Advances in the study of the behavior of full-depth reclamation (FDR) with cement
Applied Sciences (Switzerland), Vol. 9, Núm. 15
-
An engineering approach for the estimation of slewing bearing stiffness in wind turbine generators
Wind Energy, Vol. 22, Núm. 3, pp. 376-391
-
An investigation of cutting forces and tool wear in turning of Haynes 282
Journal of Manufacturing Processes, Vol. 37, pp. 529-540
-
Analysis of laser tracker-based volumetric error mapping strategies for large machine tools
Metals, Vol. 9, Núm. 7
-
Analysis of the machining process of inconel 718 parts manufactured by laser metal deposition
Materials, Vol. 12, Núm. 13
-
Analytical Procedure Based on the Matrix Structural Method for the Analysis of the Stiffness of the 2PRU-1PRS Parallel Manipulator
Robotica, Vol. 37, Núm. 8, pp. 1401-1414
-
Analytical modeling of hot behavior of Ti-6Al-4V alloy at large strain
Materials and Design, Vol. 161, pp. 114-123
-
Application of model updating techniques to turbomachinery rotor components
Advances in Mechanical Engineering, Vol. 11, Núm. 7
-
Arteztutako gainazaletan diamantatze prozesuko patroiak karakterizatzeko metodologiaren garapena
Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 1, pp. 85-99
-
Assessment of the influence of façade location and orientation in indoor environment of double-skin building envelopes with perforated metal sheets
Building and Environment, Vol. 163
-
Burnishing of FSWAluminum Al-Cu-Li components
Metals, Vol. 9, Núm. 2
-
Comparison of model free control strategies for chatter suppression by an inertial actuator
International Journal of Mechatronics and Manufacturing Systems, Vol. 12, Núm. 3-4, pp. 164-179