Publicaciones (129) Publicaciones en las que ha participado algún/a investigador/a

2023

  1. 25 Years Working with Green Steel Slag Concrete

    Lecture Notes in Civil Engineering

  2. 42CrMo4 steel flow behavior characterization for high temperature closed dies hot forging in automotive components applications

    Heliyon, Vol. 9, Núm. 11

  3. A Low-Cost System Concept for Initial Sonography Training

    Mechanisms and Machine Science

  4. A Novel Family of 2T2R Parallel Manipulators with Potential for Balance Rehabilitation

    Mechanisms and Machine Science

  5. A Numerical Study on Phase Transformation and Hardness Evolution During Scanning Induction Hardening

    Lecture Notes in Mechanical Engineering

  6. A framework for risk assessment

    Adapting the Built Environment for Climate Change: Design Principles for Climate Emergencies (Elsevier), pp. 17-36

  7. A general automatic method for mechanism optimization based on kinematic constraints and analytical Jacobian matrix

    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 237, Núm. 14, pp. 3181-3197

  8. A simplified skid resistance predicting model for a freeway network to be used in a pavement management system

    International Journal of Pavement Engineering, Vol. 24, Núm. 2

  9. A study on the three key concepts of White Etching Crack failure mode in its very early stages - Contrast with different testing methods

    Wear, Vol. 530-531

  10. ANALYSIS OF THE INCLINATION OF SLOTS IN TEXTURED CERAMIC TOOLS THROUGH THE STUDY OF THE FINAL ROUGHNESS AND CUTTING FORCES DURING CUTTING OF COLD WORK TOOL STEEL

    MM Science Journal, Vol. 2023-November, pp. 6901-6908

  11. ANALYSIS OF THIN-WALLED COMPONENTS WITH INTERNAL MICROSTRUCTURE DESIGN MANUFACTURED BY LPBF

    MM Science Journal, Vol. 2023-November, pp. 6860-6865

  12. Accelerated second-order hydrodynamic load calculation on semi-submersible floaters

    Marine Structures, Vol. 90

  13. Active flow control on airfoils by reinforcement learning

    Ocean Engineering, Vol. 287

  14. An accuracy evolution method applied to five-axis machining of curved surfaces

    International Journal of Advanced Manufacturing Technology, Vol. 125, Núm. 7-8, pp. 3475-3487

  15. Analysis of the influence of L-PBF porosity on the mechanical behavior of AlSi10Mg by XRCT-based FEM

    Journal of Materials Research and Technology, Vol. 22, pp. 958-981

  16. Analyzing the influence of dressing parameters on the real depth of cut during rotary dressing of vitrified bonded cbn grinding wheels

    Advances in Science and Technology

  17. Análisis de la eficacia del panel que indica la velocidad como medida de calmado de tráfico en carreteras de calzada única afectadas por obras

    XV Congreso de Ingeniería del Transporte (15º. La Laguna. 2023) (Universidad de La Laguna), pp. 1412-1421

  18. Applicability of existing models for the strength development of 3D-printed thixotropic concretes during hardening

    Mechanics of Advanced Materials and Structures, Vol. 30, Núm. 3, pp. 510-519

  19. Are panels indicating vehicles' speed an efficient traffic calming measure in short urban areas, when they are placed alone?

    Transportation Research Procedia

  20. Are panels indicating vehicles’ speed an efficient traffic calming measure in short urban areas, when they are placed alone?

    XV Congreso de Ingeniería del Transporte (15º. La Laguna. 2023) (Universidad de La Laguna), pp. 1432-1441