Ingeniería Mecánica

2019

1. A free navigation of an AGV to a non-static target with obstacle avoidance

   Electronics (Switzerland), Vol. 8, Núm. 2

2. A methodology to achieve the set of operation modes of reconfigurable parallel manipulators

   Meccanica, Vol. 54, Núm. 15, pp. 2507-2520

3. A methodology to evaluate the reliability impact of the replacement of welded components by additive manufacturing spare parts

   Metals, Vol. 9, Núm. 9

4. A novel experimental procedure to determine the cohesive law in ENF tests

   Composites Science and Technology, Vol. 170, pp. 42-50

5. A plain linear rule for fatigue analysis under natural loading considering the coupled fatigue and corrosion effect

   International Journal of Fatigue, Vol. 122, pp. 141-151

6. A quick cycle time sensitivity analysis of boron steel hot stamping

   Metals, Vol. 9, Núm. 2

7. Accuracy and surface quality improvements in the manufacturing of Ti-6Al-4V parts using hot single point incremental forming

   Metals, Vol. 9, Núm. 6

8. Actively lubricated hybrid journal bearings based on magnetic fluids for high-precision spindles of machine tools

   Journal of Intelligent Material Systems and Structures, Vol. 30, Núm. 15, pp. 2257-2271

9. Advances in the study of the behavior of full-depth reclamation (FDR) with cement

   Applied Sciences (Switzerland), Vol. 9, Núm. 15

10. An engineering approach for the estimation of slewing bearing stiffness in wind turbine generators

    Wind Energy, Vol. 22, Núm. 3, pp. 376-391

11. An investigation of cutting forces and tool wear in turning of Haynes 282

    Journal of Manufacturing Processes, Vol. 37, pp. 529-540

12. Analysis of laser tracker-based volumetric error mapping strategies for large machine tools

    Metals, Vol. 9, Núm. 7

13. Analysis of the machining process of inconel 718 parts manufactured by laser metal deposition

    Materials, Vol. 12, Núm. 13

14. Analytical Procedure Based on the Matrix Structural Method for the Analysis of the Stiffness of the 2PRU-1PRS Parallel Manipulator

    Robotica, Vol. 37, Núm. 8, pp. 1401-1414

15. Analytical modeling of hot behavior of Ti-6Al-4V alloy at large strain

    Materials and Design, Vol. 161, pp. 114-123

16. Application of model updating techniques to turbomachinery rotor components

    Advances in Mechanical Engineering, Vol. 11, Núm. 7

17. Arteztutako gainazaletan diamantatze prozesuko patroiak karakterizatzeko metodologiaren garapena

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 1, pp. 85-99

18. Assessment of the influence of façade location and orientation in indoor environment of double-skin building envelopes with perforated metal sheets

    Building and Environment, Vol. 163

19. Burnishing of FSWAluminum Al-Cu-Li components

    Metals, Vol. 9, Núm. 2

20. Comparison of model free control strategies for chatter suppression by an inertial actuator

    International Journal of Mechatronics and Manufacturing Systems, Vol. 12, Núm. 3-4, pp. 164-179