Publicaciones en colaboración con investigadoras/es de Universidad de Cádiz (17)

2024

  1. Un nodo sinérgico para la fabricación en España: La Sociedad de Ingeniería de Fabricación

    Encuentros multidisciplinares, Vol. 26, Núm. 76

2023

  1. Impact of In-Soil Ageing Effect on PLA Printed Parts Tensile Properties

    Polymers, Vol. 15, Núm. 4

2021

  1. Laser surface texturing as a finishing process for aerospace alloys

    Advanced Machining and Finishing (Elsevier), pp. 643-666

2020

  1. On the relationship between mechanical properties and crystallisation of chemically post-processed additive manufactured polylactic acid pieces

    Polymers, Vol. 12, Núm. 4

  2. State of the art of the fused deposition modeling using PLA: Improving the performance

    Additive and Subtractive Manufacturing: Emergent Technologies (De Gruyter), pp. 59-112

2019

  1. Fused deposition modelling interfacial and interlayer bonding in PLA post-processed parts

    Rapid Prototyping Journal, Vol. 26, Núm. 3, pp. 585-592

  2. Thin-wall machining of light alloys: A review of models and industrial approaches

    Materials, Vol. 12, Núm. 12

  3. Wear mechanisms and wear model of carbide tools during dry drilling of CFRP/TiAl6V4 stacks

    Materials, Vol. 12, Núm. 18

2018

  1. Influence of PLA filament conditions on characteristics of FDM parts

    Materials, Vol. 11, Núm. 8

2016

  1. New advances in copper biomachining by iron-oxidizing bacteria

    Corrosion Science, Vol. 112, pp. 385-392

2015

  1. SOM/SEM based Characterization of Internal Delaminations of CFRP Samples Machined by AWJM

    Procedia Engineering

2014

  1. Cutting forces prediction in the dry slotting of aluminium stacks

    Materials Science Forum

2013

  1. Cutting forces parametric model for the dry high speed contour milling of aerospace aluminium alloys

    Procedia Engineering

2012

  1. Using image analysis techniques for single evaluation of the chip shrinkage factor in orthogonal cutting process

    Key Engineering Materials

2011

  1. An XPS study of the stratified built-up layers developed onto the tool surface in the dry drilling of Ti alloys

    Advanced Materials Research

  2. SEM and EDS characterisation of layering TiOx growth onto the cutting tool surface in hard drilling processes of Ti-Al-V alloys

    Advances in Materials Science and Engineering, Vol. 2011

2008

  1. Experimental and numerical study of angular error in wire-EDM taper-cutting

    International Journal of Machine Tools and Manufacture, Vol. 48, Núm. 12-13, pp. 1420-1428