Publicaciones (38) Publicaciones en las que ha participado algún/a investigador/a

2000

  1. Analysis of kinetic parameters of an urethane-acrylate resin for pultrusion process

    Journal of Applied Polymer Science, Vol. 77, Núm. 2, pp. 355-362

  2. Análisis de riesgos en suelos contaminados: nuevas tendencias

    Residuos: Revista técnica, Año 10, Núm. 53, pp. 52-58

  3. Análisis de un proceso de oxidación avanzada de aguas fenólicas a nivel de eliminación de aromáticos intermedios

    Afinidad: Revista de química teórica y aplicada, Vol. 57, Núm. 490, pp. 439-446

  4. Application of biofiltration to the degradation of hydrogen sulfide in gas effluents

    Biodegradation, Vol. 11, Núm. 6, pp. 423-427

  5. Char-formation kinetics in the pyrolysis of sawdust in a conical spouted bed reactor

    Journal of Chemical Technology and Biotechnology, Vol. 75, Núm. 7, pp. 583-588

  6. Chemorheology and ultimate behavior of epoxy-amine mixtures modified with a liquid oligomer

    Journal of Applied Polymer Science, Vol. 76, Núm. 8, pp. 1269-1279

  7. Chromatographic analysis of the gases obtained in tyre pyrolysis

    Journal of Analytical and Applied Pyrolysis, Vol. 55, Núm. 1, pp. 43-54

  8. Ciencia, tecnología y espionaje en la Bascongada

    Los hermanos Delhuyar, la Bascongada y el wolframio (San Sebastián : Real Sociedad Bascongada de los Amigos del País = Euskalerriaren Adiskideen Elkartea, 2000), pp. 139-170

  9. Cure monitoring of catalysed cyanate ester resins

    Polymer International, Vol. 49, Núm. 7, pp. 735-742

  10. DSC studies on melting and crystallization of polyamide 6/Biopol blends

    Journal of Thermal Analysis and Calorimetry, Vol. 60, Núm. 1, pp. 117-121

  11. Determination and analysis of distribution coefficients of 137Cs in soils from Biscay (Spain)

    Environmental Pollution, Vol. 110, Núm. 1, pp. 157-164

  12. Diffusional limitations in emulsion polymerization

    Macromolecular Symposia

  13. Dynamic mechanical thermal analysis of polyamide 6/biopol blends

    Journal of Thermal Analysis and Calorimetry, Vol. 60, Núm. 1, pp. 313-317

  14. Dynamical properties of epoxy composites filled with quartz powder

    Journal of Alloys and Compounds, Vol. 310, Núm. 1-2, pp. 374-377

  15. Dynamics and morphology in nanostructured thermoset network/block copolymer blends during network formation

    Macromolecules, Vol. 33, Núm. 14, pp. 5235-5244

  16. Effect of HZSM-5 zeolite addition to a fluid catalytic cracking catalyst. Study in a laboratory reactor operating under industrial conditions

    Industrial and Engineering Chemistry Research, Vol. 39, Núm. 6, pp. 1917-1924

  17. Effect of the cure temperature on the morphology of a cyanate ester resin modified with a thermoplastic: characterization by atomic force microscopy

    European Polymer Journal, Vol. 36, Núm. 7, pp. 1445-1454

  18. Emission factor estimates of cereal waste burning in Spain

    Atmospheric Environment, Vol. 34, Núm. 19, pp. 3183-3193

  19. Influence of glass diaphragms and anionic membranes in the electrochemical oxidation of aromatic aqueous solutions

    Electrochimica Acta, Vol. 46, Núm. 2-3, pp. 315-322

  20. Influence of recirculation flow in a pilot scale downflow stationary fixed film anaerobic reactor treating piggery slurry

    Biomass and Bioenergy, Vol. 18, Núm. 5, pp. 421-430