Ingeniería Química

2015

1. A Note on an Integrated Process of Methane Steam Reforming in Junction with Pressure-Swing Adsorption to Produce Pure Hydrogen: Mathematical Modeling

   Industrial and Engineering Chemistry Research, Vol. 54, Núm. 51, pp. 12937-12947

2. Application of atmospheric CVD for internal surface coating of graphite conduit by silicon carbide

   Journal of Nuclear Materials, Vol. 456, pp. 200-205

3. Bed Pressure Drop in a Draft-Tube Conical Spouted Bed for Thermal Treatment of Wastes

   Chemical Engineering and Technology, Vol. 38, Núm. 4, pp. 709-714

4. Bed-to-surface heat transfer in conical spouted beds of biomass-sand mixtures

   Powder Technology, Vol. 283, pp. 447-454

5. Behavior of a CuFe2O4/γ-Al2O3 Catalyst for the Steam Reforming of Dimethyl Ether in Reaction-Regeneration Cycles

   Industrial and Engineering Chemistry Research, Vol. 54, Núm. 45, pp. 11285-11294

6. Behaviour of nickel–alumina spinel (NiAl2O4) catalysts for isooctane steam reforming

   International Journal of Hydrogen Energy, Vol. 40, Núm. 15, pp. 5281-5288

7. Catalytic cracking of HDPE pyrolysis volatiles over a spent FCC catalyst

   Chemical Engineering Transactions, Vol. 43, pp. 2029-2034

8. Ceria-supported Au-CuO and Au-Co<inf>3</inf>O<inf>4</inf> catalysts for CO oxidation: An ¹⁸O/¹⁶O isotopic exchange study

   Applied Catalysis B: Environmental, Vol. 168-169, Núm. C, pp. 87-97

9. Composite β-AgVO3@V1.65+V0.44+O4.8 hydrogels and xerogels for iodide capture

   Journal of Materials Chemistry A, Vol. 3, Núm. 39, pp. 19996-20012

10. Controlling coke deactivation and cracking selectivity of MFI zeolite by H3PO4 or KOH modification

    Applied Catalysis A: General, Vol. 505, pp. 105-115

11. Conversion of waste animal bones into porous hydroxyapatite by alkaline treatment: effect of the impregnation ratio and investigation of the activation mechanism

    Journal of Materials Science, Vol. 50, Núm. 23, pp. 7568-7582

12. CuO-ZnO-Al2O3/γ-Al2O3 katalizatzailearen desaktibazioa dimetil

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 28, pp. 83-94

13. Deposition of diversely textured buffer pyrolytic carbon layer in TRISO coated particle by controlled manipulation of spouted bed hydrodynamics

    Chemical Engineering Science, Vol. 128, pp. 44-53

14. Effect of Operating Conditions on Dimethyl Ether Steam Reforming over a CuFe2O4/γ-Al2O3 Bifunctional Catalyst

    Industrial and Engineering Chemistry Research, Vol. 54, Núm. 40, pp. 9722-9732

15. Effect of polyethylene co-feeding in the steam gasification of biomass in a conical spouted bed reactor

    Fuel, Vol. 153, pp. 393-401

16. Fast characterization of biomass fuels by thermogravimetric analysis (TGA)

    Fuel, Vol. 140, pp. 744-751

17. Fast co-pyrolysis of sewage sludge and lignocellulosic biomass in a conical spouted bed reactor

    Fuel, Vol. 159, pp. 810-818

18. Fast pyrolysis of eucalyptus waste in a conical spouted bed reactor

    Bioresource Technology, Vol. 194, pp. 225-232

19. Fluidization of fine and ultrafine sands in conical spouted bed

    CHoPS 2015 - 8th International Conference for Conveying and Handling of Particulate Solids

20. HDPE pyrolysis-steam reforming in a tandem spouted bed-fixed bed reactor for H2 production

    Journal of Analytical and Applied Pyrolysis, Vol. 116, pp. 34-41