Publicaciones en las que colabora con LIDE OAR-ARTETA GONZALEZ (22)

2020

  1. MOF-derived/zeolite hybrid catalyst for the production of light olefins from CO2

    ChemCatChem, Vol. 12, Núm. 22, pp. 5750-5758

2019

  1. Origin and Nature of Coke in Ethanol Steam Reforming and Its Role in Deactivation of Ni/La2O3-αAl2O3 Catalyst

    Industrial and Engineering Chemistry Research, Vol. 58, Núm. 32, pp. 14736-14751

2018

  1. Regeneration of NiAl2O4 spinel type catalysts used in the reforming of raw bio-oil

    Applied Catalysis B: Environmental, Vol. 237, pp. 353-365

  2. Stability of a Rh/CeO2-ZrO2 Catalyst in the Oxidative Steam Reforming of Raw Bio-oil

    Energy and Fuels, Vol. 32, Núm. 3, pp. 3588-3598

2017

  1. Hidrogeno-ekoizpena bio-oilaren erreformatze katalitikoaren bidez

    Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 32, pp. 35-50

  2. Reaction conditions effect and pathways in the oxidative steam reforming of raw bio-oil on a Rh/CeO2-ZrO2 catalyst in a fluidized bed reactor

    International Journal of Hydrogen Energy, Vol. 42, Núm. 49, pp. 29175-29185

2016

  1. Comparison of Noble Metal- and Copper-Based Catalysts for the Step of Methanol Steam Reforming in the Dimethyl Ether Steam Reforming Process

    Industrial and Engineering Chemistry Research, Vol. 55, Núm. 12, pp. 3546-3555

  2. Development of a bifunctional catalyst for dimethyl ether steam reforming with CuFe2O4 spinel as the metallic function

    Journal of Industrial and Engineering Chemistry, Vol. 36, pp. 169-179

  3. Kinetics of the steam reforming of dimethyl ether over CuFe2O4/γ-Al2O3

    Chemical Engineering Journal, Vol. 306, pp. 401-412

2015

  1. Behavior of a CuFe2O4/γ-Al2O3 Catalyst for the Steam Reforming of Dimethyl Ether in Reaction-Regeneration Cycles

    Industrial and Engineering Chemistry Research, Vol. 54, Núm. 45, pp. 11285-11294

  2. Effect of Operating Conditions on Dimethyl Ether Steam Reforming over a CuFe2O4/γ-Al2O3 Bifunctional Catalyst

    Industrial and Engineering Chemistry Research, Vol. 54, Núm. 40, pp. 9722-9732

  3. Thermodynamic comparison between bio-oil and ethanol steam reforming

    International Journal of Hydrogen Energy, Vol. 40, Núm. 46, pp. 15963-15971

2014

  1. Catalyst development and kinetic modelling for the steam reforming of dimethyl ether

    Catalyst development and kinetic modelling for the steam reforming of dimethyl ether

  2. Causes of deactivation of bifunctional catalysts made up of CuO-ZnO-Al 2O3 and desilicated HZSM-5 zeolite in DME steam reforming

    Applied Catalysis A: General, Vol. 483, pp. 76-84

  3. Comparison in dimethyl ether steam reforming of conventional cu-zno-al2o3 and supported pt metal catalysts

    Chemical Engineering Transactions, Vol. 37, pp. 487-492

  4. Effect of operating conditions on dimethyl ether steam reforming in a fluidized bed reactor with a CuO-ZnO-Al2O3 and desilicated ZSM-5 zeolite bifunctional catalyst

    Industrial and Engineering Chemistry Research, Vol. 53, Núm. 9, pp. 3462-3471

  5. Effect of temperature on catalyst deactivation in the dimethyl ether steam reforming

    21st International Congress of Chemical and Process Engineering, CHISA 2014 and 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2014

  6. Effect of the calcination temperature of Ni/La2O3-αAl2O3 catalyst on its kinetic behaviour in ethanol steam reforming for H2 production

    21st International Congress of Chemical and Process Engineering, CHISA 2014 and 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2014

  7. Hydrogen production by steam reforming of bio-oil/bio-ethanol mixtures in a continuous thermal-catalytic process

    International Journal of Hydrogen Energy, Vol. 39, Núm. 13, pp. 6889-6898

  8. Kinetic modelling of dimethyl ether steam reforming over CuFe2O4/A100H

    21st International Congress of Chemical and Process Engineering, CHISA 2014 and 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2014