Publicaciones en las que colabora con JUAN LUIS NAZABAL ECHEBERRIA (148)

2013

  1. Effects of the processing temperature on the nanostructure and mechanical properties of PCTG-based nanocomposites

    Journal of Applied Polymer Science, Vol. 127, Núm. 1, pp. 136-144

2012

  1. Amorphous polyamide/maleated styrene-ethylene-co-butylene-styrene nanocomposites: Effects of clay loading and compatibilizer content on morphology and mechanical properties

    Polymer Journal, Vol. 44, Núm. 3, pp. 294-300

  2. Attaining high electrical conductivity and toughness in PA6 by combined addition of MWCNT and rubber

    Composites Part A: Applied Science and Manufacturing, Vol. 43, Núm. 9, pp. 1482-1489

2011

  1. Compatible polycarbonate/polyamide 6,6 blends with fibrillar morphology

    Journal of Applied Polymer Science, Vol. 121, Núm. 1, pp. 161-168

  2. Dispersion and mechanical properties of a nanocomposite with an organoclay in an ionomer-compatibilized LDPE matrix

    Journal of Applied Polymer Science, Vol. 119, Núm. 3, pp. 1762-1770

  3. Structure, thermal stability, and mechanical properties of nanocomposites based on an amorphous polyamide

    Polymer Engineering and Science, Vol. 51, Núm. 7, pp. 1428-1436

2010

  1. Characteristics of the brittle/tough transition of poly(butylene terephthalate)/maleinized poly(ethylene-octene) blends determined by the essential work of fracture procedure

    Polymer Testing, Vol. 29, Núm. 1, pp. 27-32

  2. Compatibilization of PP/PAE blends by means of the addition of an ionomer

    Polymer Engineering and Science, Vol. 50, Núm. 8, pp. 1512-1519

  3. Processability, structure and mechanical properties of poly(ether imide)/amorphous copolyester blends

    Macromolecular Materials and Engineering, Vol. 295, Núm. 5, pp. 476-483

  4. Stiffening of poly(ethylene terephthalate) by means of polyamide 6 nanocomposite fibers produced during processing

    Composites Science and Technology, Vol. 70, Núm. 5, pp. 873-878

  5. Stiffening of polycarbonate by addition of a highly dispersed and fibrillated amorphous polyamide-based nanocomposite

    Macromolecular Materials and Engineering, Vol. 295, Núm. 3, pp. 233-242

  6. Structure and properties of polyethylene ionomer based nanocomposites

    Journal of Applied Polymer Science, Vol. 116, Núm. 4, pp. 2374-2383

2009

  1. "On the use of the essential work of fracture procedure in the determination of the fracture energy of tough polymeric materials"

    Polymer Testing, Vol. 28, Núm. 7, pp. 760-763

  2. Increasing the resistance of poly(ether imide) to solvents by blending with poly(trimethylene terephthalate)

    Journal of Applied Polymer Science, Vol. 112, Núm. 2, pp. 896-903

  3. Rubber toughening of poly(ether imide) by modification with poly(butylene terephthalate)

    European Polymer Journal, Vol. 45, Núm. 2, pp. 466-473

  4. Structure and properties of an amorphus polyamide based nanocomposite

    Polymers for Advanced Technologies, Vol. 20, Núm. 12, pp. 1060-1067

  5. Toughening and brittle-tough transition in blends of an amorphous polyamide with a modified styrene/ethylene-butylene/styrene triblock copolymer

    Polymer Engineering and Science, Vol. 49, Núm. 7, pp. 1350-1356

2008

  1. Effects of reprocessing on the structure and properties of polyamide 6 nanocomposites

    Polymer Degradation and Stability, Vol. 93, Núm. 10, pp. 1747-1752

  2. Effects of the processing sequence and critical interparticle distance in PA6-clay/mSEBS nanocomposites

    European Polymer Journal, Vol. 44, Núm. 2, pp. 287-299

  3. Solid state structure and mechanical properties of melt mixed poly(trimethylene terephthalate)/polycarbonate blends

    Journal of Applied Polymer Science, Vol. 108, Núm. 6, pp. 3828-3835