Publicaciones en las que colabora con IÑAKI BIXINTXO MONDRAGON EGAÑA (26)

2013

  1. Effect of H12MDI isomer composition on mechanical and physico-chemical properties of polyurethanes based on amorphous and semicrystalline soft segments

    Polymer Bulletin, Vol. 70, Núm. 8, pp. 2193-2210

2010

  1. Influence of phenoxy addition on the curing kinetics for uncatalyzed and catalyzed cyanate ester resin

    Journal of Applied Polymer Science, Vol. 118, Núm. 5, pp. 2869-2880

2008

  1. Micro- and macrophase separation of thermosetting systems modified with epoxidized styrene-block-butadiene-block-styrene linear triblock copolymers and their influence on final mechanical properties

    Polymer International, Vol. 57, Núm. 12, pp. 1333-1342

2007

  1. Functional patterns obtained by nanoimprinting lithography and subsequent growth of polymer brushes

    Nanotechnology, Vol. 18, Núm. 21

  2. Synthesis and characterization of resol-layered silicate nanocomposites

    Journal of Applied Polymer Science, Vol. 106, Núm. 4, pp. 2800-2807

2006

  1. Molecular dynamics of PCA bioabsorbable polymer during isothermal cold crystallization

    Macromolecular Symposia

  2. Nanostructured thermosetting systems by modification with epoxidized styrene - Butadiene star block copolymers. Effect of epoxidation degree

    Macromolecules, Vol. 39, Núm. 6, pp. 2254-2261

  3. Towards microphase separation in epoxy systems containing PEO/PPO/PEO block copolymers by controlling cure conditions and molar ratios between blocks. Part 2. Structural characterization

    Colloid and Polymer Science, Vol. 284, Núm. 12, pp. 1419-1430

  4. Viscoelastic behavior of thermosetting epoxy mixtures modified with syndiotactic polystyrene during network formation

    Journal of Applied Polymer Science, Vol. 100, Núm. 3, pp. 2348-2355

2005

  1. Curing behaviour of syndiotactic polystyrene-epoxy blends: 1. Kinetics of curing and phase separation process

    Polymer International, Vol. 54, Núm. 4, pp. 667-672

  2. Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites

    Composites Science and Technology, Vol. 65, Núm. 14, pp. 2189-2197

  3. Micro- or nanoseparated phases in thermoset blends of an epoxy resin and PEO-PPO-PEO triblock copolymer

    Polymer, Vol. 46, Núm. 18, pp. 7082-7093

  4. Nanostructured thermosetting systems from epoxidized styrene butadiene block copolymers

    Macromolecular Rapid Communications, Vol. 26, Núm. 12, pp. 982-985

  5. Phase separation and rheological behavior during curing of an epoxy resin modified with syndiotactic polystyrene

    Polymer Engineering and Science, Vol. 45, Núm. 3, pp. 303-313

  6. Properties of a vinyl ester resin modified with a liquid

    High Performance Polymers, Vol. 17, Núm. 4, pp. 605-616

2004

  1. Effect of different thermal treatments on the self-assembled nanostructures of a styrene-butadiene-styrene star block copolymer

    Polymer Degradation and Stability, Vol. 83, Núm. 3, pp. 495-507

  2. Fracture toughening of epoxy matrices with blends of resins of different molecular weights and other modifiers

    Journal of Polymer Science, Part B: Polymer Physics, Vol. 42, Núm. 21, pp. 3920-3933

  3. Synthesis and characterization of epoxidized styrene-butadiene block copolymers as templates for nanostructured thermosets

    Macromolecular Chemistry and Physics, Vol. 205, Núm. 7, pp. 987-996

2003

  1. AFM approach toward understanding morphologies in toughened thermosetting matrices

    European Polymer Journal, Vol. 39, Núm. 10, pp. 1965-1973

  2. Control of morphologies and mechanical properties of thermoplastic-modified epoxy matrices by addition of a second thermoplastic

    Polymer International, Vol. 52, Núm. 9, pp. 1444-1453