Gasteizko Ingeniaritza U.E.
Zentroa
Universidad Pública de Navarra
Pamplona, EspañaUniversidad Pública de Navarra-ko ikertzaileekin lankidetzan egindako argitalpenak (36)
2023
-
Dynamic Modeling of a Pressurized Alkaline Water Electrolyzer: A Multiphysics Approach
IEEE Transactions on Industry Applications
2022
-
Modelling and Operation of 6-Pulse Thyristor Rectifiers for supplying High Power Electrolyzers
Proceedings of the IEEE Workshop on Computers in Power Electronics, COMPEL
-
Sulphate soil stabilisation with magnesium binders for road subgrade construction
International Journal of Pavement Engineering, Vol. 23, Núm. 6, pp. 1840-1850
-
Vermicomposting of Lavender Waste: A Biological Laboratory Investigation
Agronomy, Vol. 12, Núm. 12
2021
-
Dynamic modeling and simulation of a pressurized alkaline water electrolyzer: A multiphysics approach
21st IEEE International Conference on Environment and Electrical Engineering and 2021 5th IEEE Industrial and Commercial Power System Europe, EEEIC / I and CPS Europe 2021 - Proceedings
-
Stabilization of a clay soil using cementing material from spent refractories and ground-granulated blast furnace slag
Sustainability (Switzerland), Vol. 13, Núm. 6
-
Valorization of insulation cellulose waste as solid biomass fuel
Applied Sciences (Switzerland), Vol. 11, Núm. 17
2020
-
Characterization of fresh and cured properties of polymer concretes based on two metallurgicalwastes
Applied Sciences (Switzerland), Vol. 10, Núm. 3
-
Durability of polyester polymer concretes based on metallurgical wastes for the manufacture of construction and building products
Construction and Building Materials, Vol. 240
-
Evaluation of Terrestrial Laser Scanner and Structure from Motion photogrammetry techniques for quantifying soil surface roughness parameters over agricultural soils
Earth Surface Processes and Landforms, Vol. 45, Núm. 3, pp. 605-621
-
Modelling hospital readmissions under frailty conditions for healthy aging
Expert Systems
-
The Importance of 3D Scanned Mesh Processing in FEM Simulation Results
Lecture Notes in Mechanical Engineering
-
The Importance of 3D scanned mesh processing in FEM simulation results
Advances in Design Engineering: proceedings of the XXIX International Congress INGEGRAF. 20-21 June 2019, Logroño, Spain
2018
-
On the influence of spatial resolution in soil surface roughness characterization using tls and SFM techniques
International Geoscience and Remote Sensing Symposium (IGARSS)
2017
-
Estimated and real durability of unfired clay bricks: Determining factors and representativeness of the laboratory tests
Construction and Building Materials, Vol. 131, pp. 600-605
-
Sulfate soils stabilization with magnesium-based binders
Applied Clay Science, Vol. 135, pp. 457-464
2014
-
CFD analysis of the effects of the flow distribution and heat losses on the steam reforming of methanol in catalytic (Pd/ZnO) microreactors
Chemical Engineering Journal, Vol. 238, pp. 37-44
2013
2012
-
A CFD study on the effect of the characteristic dimension of catalytic wall microreactors
AIChE Journal, Vol. 58, Núm. 9, pp. 2785-2797