Publikationen in Zusammenarbeit mit Forschern von Universidad Pública de Navarra (36)

2023

  1. Dynamic Modeling of a Pressurized Alkaline Water Electrolyzer: A Multiphysics Approach

    IEEE Transactions on Industry Applications

2022

  1. Modelling and Operation of 6-Pulse Thyristor Rectifiers for supplying High Power Electrolyzers

    Proceedings of the IEEE Workshop on Computers in Power Electronics, COMPEL

  2. Sulphate soil stabilisation with magnesium binders for road subgrade construction

    International Journal of Pavement Engineering, Vol. 23, Núm. 6, pp. 1840-1850

  3. Vermicomposting of Lavender Waste: A Biological Laboratory Investigation

    Agronomy, Vol. 12, Núm. 12

2021

  1. Dynamic modeling and simulation of a pressurized alkaline water electrolyzer: A multiphysics approach

    21st IEEE International Conference on Environment and Electrical Engineering and 2021 5th IEEE Industrial and Commercial Power System Europe, EEEIC / I and CPS Europe 2021 - Proceedings

  2. Stabilization of a clay soil using cementing material from spent refractories and ground-granulated blast furnace slag

    Sustainability (Switzerland), Vol. 13, Núm. 6

  3. Valorization of insulation cellulose waste as solid biomass fuel

    Applied Sciences (Switzerland), Vol. 11, Núm. 17

2020

  1. Characterization of fresh and cured properties of polymer concretes based on two metallurgicalwastes

    Applied Sciences (Switzerland), Vol. 10, Núm. 3

  2. Durability of polyester polymer concretes based on metallurgical wastes for the manufacture of construction and building products

    Construction and Building Materials, Vol. 240

  3. Evaluation of Terrestrial Laser Scanner and Structure from Motion photogrammetry techniques for quantifying soil surface roughness parameters over agricultural soils

    Earth Surface Processes and Landforms, Vol. 45, Núm. 3, pp. 605-621

  4. Modelling hospital readmissions under frailty conditions for healthy aging

    Expert Systems

  5. The Importance of 3D Scanned Mesh Processing in FEM Simulation Results

    Lecture Notes in Mechanical Engineering

  6. The Importance of 3D scanned mesh processing in FEM simulation results

    Advances in Design Engineering: proceedings of the XXIX International Congress INGEGRAF. 20-21 June 2019, Logroño, Spain

2018

  1. On the influence of spatial resolution in soil surface roughness characterization using tls and SFM techniques

    International Geoscience and Remote Sensing Symposium (IGARSS)

2017

  1. Estimated and real durability of unfired clay bricks: Determining factors and representativeness of the laboratory tests

    Construction and Building Materials, Vol. 131, pp. 600-605

  2. Sulfate soils stabilization with magnesium-based binders

    Applied Clay Science, Vol. 135, pp. 457-464

2014

  1. CFD analysis of the effects of the flow distribution and heat losses on the steam reforming of methanol in catalytic (Pd/ZnO) microreactors

    Chemical Engineering Journal, Vol. 238, pp. 37-44

2013

  1. Preferential oxidation of CO over Au/CuOx-CeO2 catalyst in microstructured reactors studied through CFD simulations

    Catalysis Today

  2. The importance of geometry combined with new techniques for augmented reality

    Procedia Computer Science

2012

  1. A CFD study on the effect of the characteristic dimension of catalytic wall microreactors

    AIChE Journal, Vol. 58, Núm. 9, pp. 2785-2797