FAUSTINO
MUJIKA GARITANO
PROFESORADO CATEDRATICO/A DE UNIVERSIDAD
Publicaciones en las que colabora con FAUSTINO MUJIKA GARITANO (22)
2023
-
On the equivalent flexural and shear moduli of laminated beams: Definition and determination by bending tests
Composites Part A: Applied Science and Manufacturing, Vol. 175
2021
-
Delamination fracture behavior of unidirectional carbon reinforced composites applied to wind turbine blades
Materials, Vol. 14, Núm. 3, pp. 1-16
2018
-
Analysis of DCB test of angle-ply laminates including bending-twisting coupling
Composite Structures, Vol. 190, pp. 169-178
-
Analysis of the DCB test of angle-ply laminates including residual stresses
Theoretical and Applied Fracture Mechanics, Vol. 94, pp. 197-204
-
Laminarteko hausturaren I/II modu mistoa aztertzeko saiakuntza konfigurazio berri bat
Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 1, pp. 37-50
2017
-
A novel procedure to determine the cohesive law in DCB tests
Composites Science and Technology, Vol. 152, pp. 76-84
-
Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test
Theoretical and Applied Fracture Mechanics, Vol. 87, pp. 99-109
2016
-
Application of the dual integrated force method to the analysis of the off-axis three-point flexure test of unidirectional composites
Journal of Composite Materials, Vol. 50, Núm. 3, pp. 413-426
-
Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness
Engineering Fracture Mechanics, Vol. 163, pp. 462-475
2015
-
A new approach for determining the R-curve in DCB tests without optical measurements
Engineering Fracture Mechanics, Vol. 135, pp. 274-285
-
Analysis of a reversible five-point bending configuration based on a novel two-sense support
Polymer Testing, Vol. 43, pp. 108-122
-
Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II
Engineering Fracture Mechanics, Vol. 143, pp. 63-79
-
Modelling and testing of the snap-through process of bi-stable cross-ply composites
Composite Structures, Vol. 120, pp. 41-52
-
Modelling and testing of the snap-through process of cross-ply composites
ICCM International Conferences on Composite Materials
2014
-
A top-down analysis for determining edge stresses in composite laminates
16th European Conference on Composite Materials, ECCM 2014
-
Modelling of [0/90] laminates subject to thermal effects considering mechanical curvature and through-the-thickness strain
16th European Conference on Composite Materials, ECCM 2014
-
Modelling of [0/90] laminates subject to thermal effects considering mechanical curvature and through-the-thickness strain
Composite Structures, Vol. 110, Núm. 1, pp. 77-87
-
The dual integrated force method applied to unidirectional composites
International Journal for Numerical Methods in Engineering, Vol. 98, Núm. 9, pp. 663-677
2013
-
A top-down analytic approach for the analysis of edge effects of angle-ply symmetric laminates
Composite Structures, Vol. 104, pp. 60-70
-
Application of the submodeling technique to the analysis of the edge effects of composite laminates
Journal of Reinforced Plastics and Composites, Vol. 32, Núm. 15, pp. 1099-1111