Publicaciones en colaboración con investigadoras/es de King Abdullah University of Science and Technology (15)

2024

  1. Mechanistic Insight into Heteroatom Removal from Vacuum Gas Oil Blended with PMMA or PET Waste

    ChemSusChem, Vol. 17, Núm. 15

2023

  1. Hydrocracking mechanisms of oxygenated plastics and vacuum gasoil blends

    Fuel Processing Technology, Vol. 248

  2. Thermochemical CO2 Reduction Catalyzed by Homometallic and Heterometallic Nanoparticles Generated from the Thermolysis of Supramolecularly Assembled Porous Metal-Adenine Precursors

    Inorganic chemistry, Vol. 62, Núm. 42, pp. 17444-17453

2022

  1. Fuel production via catalytic cracking of pre-hydrotreated heavy-fuel oil generated by marine-transport operations

    Fuel, Vol. 325

2021

  1. Detailed nature of tire pyrolysis oil blended with light cycle oil and its hydroprocessed products using a NiW/HY catalyst

    Waste Management, Vol. 128, pp. 36-44

2020

  1. Implications of feeding or cofeeding bio-oil in the fluid catalytic cracker (FCC) in terms of regeneration kinetics and energy balance

    Energy, Vol. 209

  2. Lessening coke formation and boosting gasoline yield by incorporating scrap tire pyrolysis oil in the cracking conditions of an FCC unit

    Energy Conversion and Management, Vol. 224

2019

  1. Pyridinium Containing Amide Based Polymeric Ionic Liquids for CO2/CH4 Separation

    ACS Sustainable Chemistry and Engineering, Vol. 7, Núm. 12, pp. 10241-10247

  2. Screening hydrotreating catalysts for the valorization of a light cycle oil/scrap tires oil blend based on a detailed product analysis

    Applied Catalysis B: Environmental, Vol. 256

2018

  1. 24GHz paper based inkjet printed quasi Yagi-Uda antenna with new bowtie director

    IET Conference Publications

2017

  1. Imbalanced nutrient recycling in a warmer ocean driven by differential response of extracellular enzymatic activities

    Global Change Biology, Vol. 23, Núm. 10, pp. 4084-4093

2016

  1. Nanoporous amide networks based on tetraphenyladamantane for selective CO2 capture

    Journal of Materials Chemistry A, Vol. 4, Núm. 21, pp. 8190-8197

  2. Sustainable Poly(Ionic Liquids) for CO2 Capture Based on Deep Eutectic Monomers

    ACS Sustainable Chemistry and Engineering, Vol. 4, Núm. 12, pp. 7200-7208

2015

  1. Fully inkjet printed RF inductors and capacitors using polymer dielectric and silver conductive ink with through vias

    IEEE Transactions on Electron Devices, Vol. 62, Núm. 3, pp. 1002-1009

2013

  1. All inkjet printed 3D microwave capacitors and inductors with vias

    IEEE MTT-S International Microwave Symposium Digest