MARTIN OLAZAR AURRECOECHEA-rekin lankidetzan egindako argitalpenak (149)

2024

  1. Effect of locating the atomizer at the inlet in fountain confined conical spouted beds for drying kaolin suspensions

    Drying Technology, Vol. 42, Núm. 3, pp. 450-461

  2. Search for Operating Conditions in the Thermal Pistachio Splitting in Fountain Confined Conical Spouted Beds

    Food and Bioprocess Technology

  3. Sensitive dependency of minimum spouting velocity on angle of repose of solid particles and cone angle in conical spouted beds

    Powder Technology, Vol. 436

  4. Spout geometry of fine particle conical spouted beds equipped with internal devices

    Powder Technology, Vol. 440

2023

  1. A comprehensive review of primary strategies for tar removal in biomass gasification

    Energy Conversion and Management, Vol. 276

  2. A novel alternative method for pistachio nuts splitting using conical spouted beds

    Chemical Engineering Science, Vol. 282

  3. Appraisal of agroforestry biomass wastes for hydrogen production by an integrated process of fast pyrolysis and in line steam reforming

    Journal of Environmental Management, Vol. 347

  4. Influence of oxidative conditions on the deactivation of an equilibrium FCC catalyst in the fast pyrolysis of HDPE in a conical spouted bed reactor

    Chemical Engineering Journal, Vol. 472

  5. Intermittent Drying of Soybeans in Conical Spouted Beds: Modeling Approach

    Industrial and Engineering Chemistry Research, Vol. 62, Núm. 21, pp. 8489-8499

  6. Syngas production by bio-oil steam gasification in a fountain confined conical spouted bed reactor

    Fuel, Vol. 345

2022

  1. A model for predicting the performance of a batch fountain confined spouted bed dryer at low and moderate temperatures

    Powder Technology, Vol. 405

  2. Activity and stability of different Fe loaded primary catalysts for tar elimination

    Fuel, Vol. 317

  3. Assessment of pressure drop in conical spouted beds of biomass by artificial neural networks and comparison with empirical correlations

    Particuology, Vol. 70, pp. 1-9

  4. Bed symmetry in the fountain confined conical spouted beds with open-sided draft tubes

    Powder Technology, Vol. 399

  5. Conditioning the volatile stream from biomass fast pyrolysis for the attenuation of steam reforming catalyst deactivation

    Fuel, Vol. 312

  6. Mass transfer in conical spouted beds equipped with internal devices

    Powder Technology, Vol. 410

  7. Oxidative Fast Pyrolysis of High-Density Polyethylene on a Spent Fluid Catalytic Cracking Catalyst in a Fountain Confined Conical Spouted Bed Reactor

    ACS Sustainable Chemistry and Engineering, Vol. 10, Núm. 48, pp. 15791-15801

2021

  1. Assessment of product yields and catalyst deactivation in fixed and fluidized bed reactors in the steam reforming of biomass pyrolysis volatiles

    Process Safety and Environmental Protection, Vol. 145, pp. 52-62

  2. Draft tube design based on a borescopic technique in conical spouted beds

    Advanced Powder Technology, Vol. 32, Núm. 11, pp. 4420-4431

  3. Drying of particulate materials in draft tube conical spouted beds: Energy analysis

    Powder Technology, Vol. 388, pp. 110-121