Publicaciones en las que colabora con GONZALO MARIA GUERRICA ECHEVARRIA ESTANGA (23)

2018

  1. The effects of the location of organoclay on the structure and mechanical properties of compatibilized polypropylene/polyamide-12 ternary nanocomposites

    Polymer Engineering and Science, Vol. 58, Núm. 6, pp. 830-838

2017

  1. CNT-induced morphology and its effect on properties in PLA/PBAT-based nanocomposites

    European Polymer Journal, Vol. 93, pp. 545-555

  2. Morphology and properties of electrically and rheologically percolated PLA/PCL/CNT nanocomposites

    Journal of Applied Polymer Science, Vol. 134, Núm. 36

2016

  1. Structure and properties of poly(lactic acid)/poly(ϵ-caprolactone) nanocomposites with kinetically induced nanoclay location

    Journal of Applied Polymer Science, Vol. 133, Núm. 33

2015

  1. Melt processed PLA/PCL blends: Effect of processing method on phase structure, morphology, and mechanical properties

    Journal of Applied Polymer Science, Vol. 132, Núm. 41

2012

  1. Morfología y propiedades de mezclas PLA/elastómero modificadas con PBT

    Nuevos desafíos para la Ciencia y Tecnología de Polímeros [Recurso electrónico]: VI Congreso Nacional de Jóvenes Investigadores en Polímeros

2009

  1. Structure and mechanical properties of impact modified poly(butylene terephthalate)/poly(ethylene terephthalate) blends

    Polymer Engineering and Science

2007

  1. Influence of compatibilization on the mechanical behavior of poly(trimethylene terephthalate)/poly(ethylene-octene) blends

    European Polymer Journal, Vol. 43, Núm. 3, pp. 1027-1037

2006

  1. Structure and mechanical properties of compatibilized poly(ethylene terephthalate)/poly(ethylene octene) blends

    Polymer Engineering and Science, Vol. 46, Núm. 2, pp. 172-180

2005

  1. Supertoughness in polysulfone/poly(ethylene-octene) blends

    Macromolecular Materials and Engineering, Vol. 290, Núm. 1, pp. 38-44

2004

  1. Partially miscible blends based on a polyarylate and poly(trimethylene terephthalate)

    Journal of Applied Polymer Science, Vol. 92, Núm. 3, pp. 1559-1561

2003

  1. Influence of fillers on the mechanical response of an amorphous liquid-crystalline polymer

    Journal of Applied Polymer Science, Vol. 88, Núm. 4, pp. 998-1003

  2. Water sorption in polyamide 6/poly(amino-ether) blends. I. Sorption characteristics and phase behavior

    Journal of Macromolecular Science - Pure and Applied Chemistry, Vol. 40 A, Núm. 6, pp. 557-569

  3. Water sorption in polyamide 6/poly(amino-ether) blends. II. Mechanical behavior

    Journal of Macromolecular Science - Pure and Applied Chemistry, Vol. 40 A, Núm. 7, pp. 705-714

2002

  1. Synergistic mechanical behaviour in new polyamide 6/poly(amino-ether) blends

    Journal of Materials Science, Vol. 37, Núm. 21, pp. 4529-4535

2001

  1. Influence of the preparation method on the mechanical properties of a thermotropic liquid crystalline copolyester

    Polymer Testing, Vol. 20, Núm. 4, pp. 403-408

2000

  1. Interfacial tension as a parameter to characterize the miscibility level of polymer blends

    Polymer Testing, Vol. 19, Núm. 7, pp. 849-854

  2. Solvent sorption and its influence on the mechanical properties of talc-filled polypropylene

    Journal of Macromolecular Science - Physics, Vol. 39

  3. Solvent sorption effects on the structure and properties of PP/Rodrun blends

    Journal of Polymer Science, Part B: Polymer Physics, Vol. 38, Núm. 8, pp. 1090-1100

1999

  1. Morphology and Physical Properties of Injection-Molded, Mineral-Filled Polyamide 6/Poly(hydroxy ether of bisphenol A) Blends

    Journal of Applied Polymer Science, Vol. 73, Núm. 9, pp. 1805-1814