Publicaciones en las que colabora con JOSE MARIA ARANDES ESTEBAN (26)

2012

  1. Inhibiting effect of water on the deactivation of the metallic function in the syngas to dimethyl ether process

    CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES

2011

  1. Co-feeding water to attenuate deactivation of the catalyst metallic function (CuO-ZnO-Al2O3) by coke in the direct synthesis of dimethyl ether

    Applied Catalysis B: Environmental, Vol. 106, Núm. 1-2, pp. 167-173

2010

  1. Composition of the products obtained in the cracking of a mixture of atmospheric residue and vacuum gas-oil

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

  2. Kinetic modelling for the deactivation of a CuO-ZnO-Al 2O 3/γ-Al 2O 3 bifunctional catalyst in the single-step DME synthesis

    19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7

  3. Regeneration of CuO-ZnO-Al2O3/γ-Al2O3 catalyst in the direct synthesis of dimethyl ether

    Applied Catalysis B: Environmental, Vol. 94, Núm. 1-2, pp. 108-116

2009

  1. HZSM-5 zeolite as catalyst additive for residue cracking under FCC conditions

    Energy and Fuels, Vol. 23, Núm. 9, pp. 4215-4223

2008

  1. Effect of atmospheric residue incorporation in the fluidized catalytic cracking (FCC) feed on product stream yields and composition

    Energy and Fuels, Vol. 22, Núm. 4, pp. 2149-2156

  2. Effect of the operating conditions on the adsorption of water and methanol over γ-Al 2O 3

    CHISA 2008 - 18th International Congress of Chemical and Process Engineering

2007

  1. Kinetic modeling of dimethyl ether synthesis in a single step on a CuO-ZnO-Al2O3/γ-Al2O3 catalyst

    Industrial and Engineering Chemistry Research, Vol. 46, Núm. 17, pp. 5522-5530

2006

  1. A study on the techniques for monitoring the reduction of bifunctional catalysts used in the single-step synthesis of dimethyl ether

    CHISA 2006 - 17th International Congress of Chemical and Process Engineering

  2. Development of new catalysts for methanol synthesis at low temperature

    CHISA 2006 - 17th International Congress of Chemical and Process Engineering

2005

  1. Direct synthesis of dimethyl ether from (H2+CO) and (H 2+CO2) feeds. Effect of feed composition

    International Journal of Chemical Reactor Engineering, Vol. 3

  2. Effect of operating conditions on the synthesis of dimethyl ether over a CuO-ZnO-Al2O3/NaHZSM-5 bifunctional catalyst

    Catalysis Today

  3. Petrolioaren ordezko erregaien lorpena sintesi-gasaren eta co2-aren bidez

    VIII Congreso Internacional de Ingeniería de Proyectos: Bilbao 6-8 de octubre de 2004. Actas

  4. Synthesis of dimethyl ether: A process for syngas and CO 2 transformation into a new clean fuel

    7th World Congress of Chemical Engineering, GLASGOW2005, incorporating the 5th European Congress of Chemical Engineering

  5. Valorization of polypropylene pyrolysis waxes by catalytic cracking on hybrid catalysts

    7th World Congress of Chemical Engineering, GLASGOW2005, incorporating the 5th European Congress of Chemical Engineering

2004

  1. Valorization by thermal cracking over silica of polyolefins dissolved in LCO

    Fuel Processing Technology, Vol. 85, Núm. 2-3, pp. 125-140

2003

  1. Study of the preparation and composition of the metallic function for the selective hydrogenation of CO2 to gasoline over bifunctional catalysts

    Journal of Chemical Technology and Biotechnology

  2. Thermal recycling of polystyrene and polystyrene-butadiene dissolved in a light cycle oil

    Journal of Analytical and Applied Pyrolysis, Vol. 70, Núm. 2, pp. 747-760

  3. Valorization of polyolefins dissolved in light cycle oil over HY zeolites under fluid catalytic cracking unit conditions

    Industrial and Engineering Chemistry Research, Vol. 42, Núm. 17, pp. 3952-3961