Publicaciones en las que colabora con IÑAKI BIXINTXO MONDRAGON EGAÑA (19)

2010

  1. Effect of diisocyanate structure on thermal properties and microstructure of polyurethanes based on polyols derived from renewable resources

    AIP Conference Proceedings

  2. Microstructure and properties of polyurethanes derived from castor oil

    Polymer Degradation and Stability

2008

  1. Structure-property relationships of thermoplastic polyurethane elastomers based on polycarbonate diols

    Journal of Applied Polymer Science, Vol. 108, Núm. 5, pp. 3092-3103

2006

  1. Crystallization of poly(L-lactid acid) monitored by dielectric relaxation spectroscopy and atomic force microscopy

    Journal of Microscopy, Vol. 224, Núm. 3, pp. 277-289

  2. Influence of PS-b-PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends

    Journal of Applied Polymer Science, Vol. 102, Núm. 1, pp. 479-488

2005

  1. Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites

    Composites Science and Technology, Vol. 65, Núm. 14, pp. 2189-2197

  2. Influence of molecular weight and chemical structure of soft segment in reaction kinetics of polycarbonate diols with 4,4′-diphenylmethane diisocyanate

    European Polymer Journal, Vol. 41, Núm. 12, pp. 3051-3059

  3. Properties of a vinyl ester resin modified with a liquid

    High Performance Polymers, Vol. 17, Núm. 4, pp. 605-616

2004

  1. A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites

    Polymer Composites, Vol. 25, Núm. 5, pp. 470-479

2003

  1. AFM approach toward understanding morphologies in toughened thermosetting matrices

    European Polymer Journal, Vol. 39, Núm. 10, pp. 1965-1973

2002

  1. Characterization of interfacial behaviour in carbon-fibre/cyanate composites

    Composites Science and Technology, Vol. 62, Núm. 2, pp. 299-309

  2. Morphological variations in PMMA-modified epoxy mixtures by PEO addition

    Polymer, Vol. 43, Núm. 4, pp. 1241-1248

2001

  1. Curing of epoxy-urethane copolymers in a heated mold: Effect of the curing conditions on the phase-separation process

    Journal of Applied Polymer Science, Vol. 81, Núm. 4, pp. 889-900

  2. Dicyanate ester-polyetherimide semi-interpenetrating polymer networks. II. Effects of morphology on the fracture toughness and mechanical properties

    Journal of Applied Polymer Science, Vol. 80, Núm. 14, pp. 2759-2767

  3. Influence of curing conditions on the morphologies of a PMMA-modified epoxy matrix

    Polymer, Vol. 42, Núm. 25, pp. 09909-09914

  4. Rheokinetic variations during curing of a tetrafunctional epoxy resin modified with two thermoplastics

    European Polymer Journal, Vol. 37, Núm. 9, pp. 1863-1869

  5. Storage modulus of polybutadiene core in acrylonitrile-butadiene-styrene polymers with different degrees of grafting

    Journal of Applied Polymer Science, Vol. 81, Núm. 4, pp. 924-930

  6. Ultimate properties of rubber and core-shell modified epoxy matrices with different chain flexibilities

    Journal of Materials Science, Vol. 36, Núm. 4, pp. 845-852

2000

  1. Effect of the cure temperature on the morphology of a cyanate ester resin modified with a thermoplastic: characterization by atomic force microscopy

    European Polymer Journal, Vol. 36, Núm. 7, pp. 1445-1454