![Foto de MARTIN](/img/nophoto.png)
MARTIN
OLAZAR AURRECOECHEA
PROFESORADO CATEDRATICO/A DE UNIVERSIDAD
Publications (495) MARTIN OLAZAR AURRECOECHEA publications
2024
-
Biomass Source Influence on Hydrogen Production through Pyrolysis and in Line Oxidative Steam Reforming
ChemSusChem
-
Biomass pyrolysis and in-line air–steam reforming as a potential strategy to progress towards sustainable ammonia production
Energy Conversion and Management, Vol. 304
-
Catalytic pyrolysis of date palm seeds on HZSM-5 and dolomite in a pyroprobe reactor in line with GC/MS
Biomass Conversion and Biorefinery, Vol. 14, Núm. 2, pp. 2799-2818
-
Effect of locating the atomizer at the inlet in fountain confined conical spouted beds for drying kaolin suspensions
Drying Technology, Vol. 42, Núm. 3, pp. 450-461
-
Energy Analysis and Heat Integration in the Joint Process of Biomass Fast Pyrolysis and In Line Sorption Enhanced Steam Reforming
Energy and Fuels, Vol. 38, Núm. 15, pp. 14402-14413
-
Functional variation of minimum spouting velocity with static bed height in conical spouted beds
Chemical Engineering Research and Design, Vol. 208, pp. 204-208
-
High-yield H2 production from HDPE through integrated pyrolysis and plasma-catalysis reforming process
Chemical Engineering Journal, Vol. 479
-
Impact of pyrolysis process conditions on the features of the biochar from Opuntia ficus indica fruit peels
Biomass Conversion and Biorefinery
-
Insight into the joint valorization of CO2 and waste plastics by pyrolysis and in line dry reforming for syngas production
Fuel Processing Technology, Vol. 253
-
Minimum spouting velocity of fine particles in fountain confined conical spouted beds using machine learning and least square fitting approaches
Canadian Journal of Chemical Engineering
-
Search for Operating Conditions in the Thermal Pistachio Splitting in Fountain Confined Conical Spouted Beds
Food and Bioprocess Technology
-
Selective H2 production from plastic waste through pyrolysis and in-line oxidative steam reforming
Energy, Vol. 302
-
Sensitive dependency of minimum spouting velocity on angle of repose of solid particles and cone angle in conical spouted beds
Powder Technology, Vol. 436
-
Spout geometry of fine particle conical spouted beds equipped with internal devices
Powder Technology, Vol. 440
2023
-
A comprehensive review of primary strategies for tar removal in biomass gasification
Energy Conversion and Management, Vol. 276
-
A novel alternative method for pistachio nuts splitting using conical spouted beds
Chemical Engineering Science, Vol. 282
-
Application of Green Polymeric Nanocomposites for Enhanced Oil Recovery by Spontaneous Imbibition from Carbonate Reservoirs
Polymers, Vol. 15, Núm. 14
-
Applying conventional and intelligent approaches to model the minimum spouting velocity of vegetable biomasses in conical spouted beds
Powder Technology, Vol. 418
-
Appraisal of agroforestry biomass wastes for hydrogen production by an integrated process of fast pyrolysis and in line steam reforming
Journal of Environmental Management, Vol. 347
-
Assessment of pine wood biomass wastes valorization by pyrolysis with focus on fast pyrolysis biochar production
Journal of the Energy Institute, Vol. 108