FAUSTINO
MUJIKA GARITANO
PROFESORADO CATEDRATICO/A DE UNIVERSIDAD
Publicaciones (71) Publicaciones de FAUSTINO MUJIKA GARITANO
2024
-
Analytical determination and numerical validation of the shear factor in annular sector cross sections
Structures, Vol. 62
-
Energy release rate in bimaterial specimens tested in pure modes I and II
Engineering Fracture Mechanics, Vol. 301
2023
-
Mode decoupling in interlaminar fracture toughness tests on bimaterial specimens
Engineering Fracture Mechanics, Vol. 290
-
On the equivalent flexural and shear moduli of laminated beams: Definition and determination by bending tests
Composites Part A: Applied Science and Manufacturing, Vol. 175
2022
-
Analysis of displacement path dependence in mixed mode cohesive law
Engineering Fracture Mechanics, Vol. 276
2021
-
Delamination fracture behavior of unidirectional carbon reinforced composites applied to wind turbine blades
Materials, Vol. 14, Núm. 3, pp. 1-16
2020
-
A simple analytical method for determining interlaminar shear stresses in symmetric laminates
Structures, Vol. 25, pp. 683-695
-
Mode I cohesive law characterization procedure in adhesive joints
ECCM 2018 - 18th European Conference on Composite Materials
-
Numerical assessment of an experimental procedure applied to DCB tests
Polymer Testing, Vol. 82
-
Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different
Polymer Testing, Vol. 81
2019
-
A novel experimental procedure to determine the cohesive law in ENF tests
Composites Science and Technology, Vol. 170, pp. 42-50
2018
-
Analysis of DCB test of angle-ply laminates including bending-twisting coupling
Composite Structures, Vol. 190, pp. 169-178
-
Analysis of the DCB test of angle-ply laminates including residual stresses
Theoretical and Applied Fracture Mechanics, Vol. 94, pp. 197-204
-
Comparison between the stiffness method and the hybrid method applied to a circular ring
Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, Núm. 2
-
Laminarteko hausturaren I/II modu mistoa aztertzeko saiakuntza konfigurazio berri bat
Ekaia: Euskal Herriko Unibertsitateko zientzi eta teknologi aldizkaria, Núm. 1, pp. 37-50
2017
-
A novel procedure to determine the cohesive law in DCB tests
Composites Science and Technology, Vol. 152, pp. 76-84
-
Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test
Theoretical and Applied Fracture Mechanics, Vol. 87, pp. 99-109
-
Greenstick fracture in composite pultruded rods
Composites Part B: Engineering, Vol. 110, pp. 106-115
2016
-
Application of the dual integrated force method to the analysis of the off-axis three-point flexure test of unidirectional composites
Journal of Composite Materials, Vol. 50, Núm. 3, pp. 413-426
-
Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness
Engineering Fracture Mechanics, Vol. 163, pp. 462-475