Publicaciones en las que colabora con JAVIER BILBAO ELORRIAGA (17)

2022

  1. Bed symmetry in the fountain confined conical spouted beds with open-sided draft tubes

    Powder Technology, Vol. 399

2020

  1. Effect of operating conditions on the drying of fine and ultrafine sand in a fountain confined conical spouted bed

    Drying Technology, Vol. 38, Núm. 11, pp. 1446-1461

2018

  1. A new fountain confinement device for fluidizing fine and ultrafine sands in conical spouted beds

    Powder Technology, Vol. 328, pp. 38-46

2017

  1. Correlations for calculating peak and spouting pressure drops in conical spouted beds of biomass

    Journal of the Taiwan Institute of Chemical Engineers, Vol. 80, pp. 678-685

  2. Fountain confined conical spouted beds

    Powder Technology, Vol. 312, pp. 334-346

2016

  1. Minimum spouting velocity for conical spouted beds of vegetable waste biomasses

    Journal of the Taiwan Institute of Chemical Engineers, Vol. 60, pp. 509-519

2015

  1. Influence of contactor geometry and draft tube configuration on the cycle time distribution in sawdust conical spouted beds

    Chemical Engineering Research and Design, Vol. 102, pp. 80-89

2014

  1. Operating and peak pressure drops in conical spouted beds equipped with draft tubes of different configuration

    Industrial and Engineering Chemistry Research, Vol. 53, Núm. 1, pp. 415-427

2013

  1. Effect of draft tube geometry on pressure drop in draft tube conical spouted beds

    Canadian Journal of Chemical Engineering, Vol. 91, Núm. 11, pp. 1865-1870

  2. Minimum spouting velocity of conical spouted beds equipped with draft tubes of different configuration

    Industrial and Engineering Chemistry Research, Vol. 52, Núm. 8, pp. 2995-3006

  3. Particle cycle times and solid circulation rates in conical spouted beds with draft tubes of different configuration

    Industrial and Engineering Chemistry Research, Vol. 52, Núm. 45, pp. 15959-15967

  4. Reply to "A correction on one-dimensional modelling of conical spouted beds", published in Chem. Eng. Process. 48 (2009) 1264-1269

    Chemical Engineering and Processing: Process Intensification

2012

  1. Drying of Biomass in a Conical Spouted Bed with Different Types of Internal Devices

    Drying Technology, Vol. 30, Núm. 2, pp. 207-216

2011

  1. Effect of temperature on fine particle drying in a draft-tube conical spouted bed

    Chemical Engineering and Technology, Vol. 34, Núm. 7, pp. 1130-1135

  2. Modelling batch drying of sand in a draft-tube conical spouted bed

    Chemical Engineering Research and Design, Vol. 89, Núm. 10, pp. 2054-2062

2009

  1. Minimum spouting velocity under vacuum and high temperature in conical spouted beds

    Canadian Journal of Chemical Engineering, Vol. 87, Núm. 4, pp. 541-546

  2. One-dimensional modelling of conical spouted beds

    Chemical Engineering and Processing: Process Intensification, Vol. 48, Núm. 7, pp. 1264-1269