Publicaciones en las que colabora con JOSE ANTONIO GONZALEZ MARCOS (22)

2017

  1. Steady-state NH3-SCR global model and kinetic parameter estimation for NOx removal in diesel engine exhaust aftertreatment with Cu/chabazite

    Catalysis Today, Vol. 296, pp. 95-104

2016

  1. Performance of Cu-ZSM-5 in a Coupled Monolith NSR-SCR System for NOx Removal in Lean-Burn Engine Exhaust

    Topics in Catalysis, Vol. 59, Núm. 2-4, pp. 259-267

2006

  1. Intercooled double-bed reactor for LTWGS reaction with catalyst poisoning by chlorine: Inlet temperatures for the maximization of the production

    International Journal of Chemical Reactor Engineering, Vol. 4, pp. 1-15

2005

  1. Kinetics of the low-temperature WGS reaction over a CuO/ZnO/Al 2O3 catalyst

    Industrial and Engineering Chemistry Research, Vol. 44, Núm. 1, pp. 41-50

  2. Optimization of inlet temperature for deactivating LTWGS reactor performance

    AIChE Journal

2001

  1. Kinetic considerations of three-way catalysis in automobile exhaust converters

    Applied Catalysis B: Environmental, Vol. 32, Núm. 4, pp. 243-256

2000

  1. Deep catalytic oxidation of chlorinated VOC mixtures from groundwater stripping emissions

    Studies in Surface Science and Catalysis, Vol. 130 B, pp. 1229-1234

1999

  1. Kinetics of weight loss and chain scission in the thermooxidative degradation of poly[1-(trimethylsilyl)-1-propyne] films

    Journal of Polymer Science, Part A: Polymer Chemistry, Vol. 37, Núm. 23, pp. 4309-4317

  2. Study of the pretreatment chemistry and thermal stability of zirconia supported Ru-Pt catalysts

    Journal of Catalysis, Vol. 187, Núm. 1, pp. 24-29

1997

  1. Influence of water and hydrocarbon processed in feedstream on the three-way behaviour of platinum-alumina catalysts

    Applied Catalysis B: Environmental, Vol. 12, Núm. 1, pp. 61-79

1996

  1. Yield and Purity Comparison of Dimethoate Manufacturing Processes: Homogeneous Reaction, Two-Phase Uncatalyzed Reaction, and Phase Transfer Catalysis

    Industrial and Engineering Chemistry Research, Vol. 35, Núm. 12, pp. 4389-4393

1994

  1. Preparation, activity and durability of promoted platinum catalysts for automotive exhaust control

    Applied Catalysis B, Environmental, Vol. 3, Núm. 2-3, pp. 191-204

1993

  1. Behavior of Highly Dispersed Platinum Catalysts in Liquid-Phase Hydrogenations

    Industrial and Engineering Chemistry Research, Vol. 32, Núm. 6, pp. 1035-1040

  2. Promoter Effects on Platinum Catalysts for Automotive Exhaust Control

    Studies in Surface Science and Catalysis, Vol. 75, Núm. C, pp. 2689-2692

  3. Surface Features and Catalytic Performance of Platinum/Alumina Catalysts in Slurry-Phase Hydrogenation

    Industrial and Engineering Chemistry Research, Vol. 32, Núm. 11, pp. 2457-2463

1992

  1. Optimal inlet temperature trajectories for adiabatic packed reactors with catalyst decay

    Chemical Engineering Science, Vol. 47, Núm. 6, pp. 1495-1501

1991

  1. Analysis of combined temperature and space time trajectories to maintain constant the exit conversion of fixed bed reactors with catalyst decay

    The Chemical Engineering Journal, Vol. 47, Núm. 2, pp. 105-112

  2. Kinetics of Isomerization of Maleic Acid Using Ammonium Bromide and Ammonium Peroxydisulfate as Catalyst

    Industrial and Engineering Chemistry Research, Vol. 30, Núm. 9, pp. 2138-2143

  3. Techno-economic optimization of isomerization of maleic acid to fumaric acid using ammonium bromide as a soluble catalyst

    Chemical Engineering and Processing, Vol. 30, Núm. 1, pp. 15-21

1990

  1. Analysis of the lumped and distributed optimal temperature trajectories for packed bed reactors with concentration dependent catalyst deactivation

    The Canadian Journal of Chemical Engineering, Vol. 68, Núm. 5, pp. 860-866