Aitor Larrañaga Varga-rekin lankidetzan egindako argitalpenak (41)

2019

  1. Comparison of the thermal resistance behaviour of synthesized Ln4Al2O9 (Ln = Y, Sm, Eu, Gd, Tb) materials vs commercial Zr0.8Y0.2O1.9 (8YSZ)

    Surface and Coatings Technology, Vol. 374, pp. 745-751

  2. Los servicios generales de investigación (sgiker) de la UPV/EU impulsan la generación de vocaciones científicas entre el alumnado de primaria

    Evaluación de la calidad de la investigación y de la educación superior: XVI FECIES. Libro de actas

  3. SOFC cathodic layers using wet powder spraying technique with self synthesized nanopowders

    International Journal of Hydrogen Energy, Vol. 44, Núm. 14, pp. 7555-7563

  4. Synthesis of new Ln4(Al2O6F2)O2 (Ln = Sm, Eu, Gd) phases with a cuspidine-related structure

    IUCrJ, Vol. 6, pp. 128-135

2018

  1. Characterization of Ln4Al2O9 (Ln=Y, Sm, Eu, Gd, Tb) rare-earth aluminates as novel high-temperature barrier materials

    Ceramics International, Vol. 44, Núm. 8, pp. 8761-8767

  2. Combustion synthesis and characterization of Ln1−xMxCr0.9Ni0.1O3 (Ln = La and/or Nd; M = Sr and/or Ca; x ≤ 0.25) perovskites for SOFCs anodes

    Ceramics International, Vol. 44, Núm. 2, pp. 2240-2248

2017

  1. Designing multifunctional pigments for an improved energy efficiency in buildings

    Energy and Buildings, Vol. 147, pp. 9-13

  2. Effect of the synthesis conditions on the properties of La0.15Sm0.35Sr0.08Ba0.42FeO3 − δ cathode material for SOFCs

    Powder Technology, Vol. 322, pp. 131-139

  3. Scalable synthetic method for SOFC compounds

    Solid State Ionics, Vol. 313, pp. 52-57

2016

  1. Effect of synthesis conditions on electrical and catalytical properties of perovskites with high value of A-site cation size mismatch

    International Journal of Hydrogen Energy, Vol. 41, Núm. 43, pp. 19810-19818

  2. Evaluation of Using LaNi0.6Fe0.4O3– δ Contact Layer Between La0.6Sr0.4FeO3 Cathode and Crofer22APU Interconnect for Solid Oxide Fuel Cells

    Fuel Cells, Vol. 16, Núm. 3, pp. 330-339

  3. Femtosecond laser micromachining of metallic/ceramic composite material for solid oxide fuel cell devices

    International Journal of Hydrogen Energy, Vol. 41, Núm. 38, pp. 17053-17063

  4. Preparation and characterization of high NIR reflective pigments based in ultramarine blue

    Energy and Buildings, Vol. 126, pp. 170-176

  5. Synthesis method dependence of the lattice effects in Ln0.5M0.5FeO3 perovskites (Ln=La and (Nd or Gd);M=Ba and (Ca or Sr))

    Materials Research Express, Vol. 3, Núm. 5

2015

  1. Characterization of LaNi0.6Fe0.4O3 perovskite synthesized by glycine-nitrate combustion method

    Solid State Ionics, Vol. 269, pp. 24-29

  2. Evaluation of using protective/conductive coating on Fe-22Cr mesh as a composite cathode contact material for intermediate solid oxide fuel cells

    International Journal of Hydrogen Energy, Vol. 40, Núm. 14, pp. 4804-4818

  3. Laser machining of LaNi0.6M0.4O3-δ (M: Co, Fe) dip-coated on a Fe-22Cr mesh material to obtain a new contact coating for SOFC: Interaction between Crofer22APU interconnect and La0.6Sr0.4FeO3 cathode

    International Journal of Hydrogen Energy, Vol. 40, Núm. 26, pp. 8407-8418

  4. Metallic/Ceramic (Fe-22Cr mesh/LaNi0.6Fe0.4O3-δ) Composite as Contact Material for SOFCs

    ECS Transactions

2014

  1. Effects of synthesis conditions on the structural, stability and ion conducting properties of Li0.30(La0.50Ln 0.50)0.567TiO3 (Ln=La, Pr, Nd) solid electrolytes for rechargeable lithium batteries

    Ceramics International, Vol. 40, Núm. 6, pp. 8761-8768

  2. Effects of using (La0.8Sr0.2)0.95Fe 0.6Mn0.3Co0.1O3 (LSFMC), LaNi 0.6Fe0.4O3-δ (LNF) and LaNi 0.6Co0.4O3-δ (LNC) as contact materials on solid oxide fuel cells

    Journal of Power Sources, Vol. 248, pp. 1067-1076