Publications (196) AGUSTIN SALAZAR HERNANDEZ publications

2024

  1. Comment on “A spatially resolved optical method to measure thermal diffusivity” [Rev. Sci. Instrum. 94, 043003 (2023)]

    Review of Scientific Instruments

  2. Measuring the in-plane thermal diffusivity of anisotropic solids by lock-in infrared thermography: Laser-spot vs laser-line heating

    Journal of Applied Physics, Vol. 135, Núm. 13

2023

  1. Characterization of semi-infinite delaminations using lock-in thermography: Experimental results

    NDT and E International, Vol. 138

  2. Characterization of semi-infinite delaminations using lock-in thermography: Theory and numerical experiments

    NDT and E International, Vol. 138

  3. Estimation of the area and depth of buried heat sources: an approach to characterize defects in inductive and ultrasound excited thermography

    Proceedings of SPIE - The International Society for Optical Engineering

  4. Investigation of the evolution of thermal properties in ferrielectric CuInP2S6 and Ag0.1Cu0.9InP2S6 layered crystals by means of ac photopyroelectric calorimetry

    Low Temperature Physics, Vol. 49, Núm. 5, pp. 531-538

  5. Investigation of the evolution of thermal properties in ferrielectric CuInP2S6 and Ag0.1Cu0.9InP2S6 layered crystals by means of ac photopyroelectric calorimetry

    Fizika Nizkikh Temperatur, Vol. 49, Núm. 5, pp. 580-587

  6. Measuring the thermal diffusivity and conductivity of thermal insulators using laser-spot step-heating thermography

    Infrared Physics and Technology, Vol. 133

  7. Strong influence of the surrounding gas in laser-spot lock-in thermography

    Journal of Applied Physics, Vol. 133, Núm. 18

  8. Thermographic Estimation of the Area and Depth of Buried Heat Sources for Nondestructive Characterization of Horizontal Defects

    Journal of Nondestructive Evaluation, Vol. 42, Núm. 4

2022

  1. Assessing the thermal diffusivity and principal directions of moving samples by infrared thermography: towards fiber orientation monitoring in production chains

    Proceedings of SPIE - The International Society for Optical Engineering

  2. Response to "comment on 'Sizing the depth and width of ideal delaminations using modulated photothermal radiometry'" (J. Appl. Phys. (2022) 132 (106191))

    Journal of Applied Physics

  3. Sizing the depth and width of ideal delaminations using modulated photothermal radiometry

    Journal of Applied Physics, Vol. 131, Núm. 8

  4. Vertical Cracks Excited in Lock-in Vibrothermography Experiments: Identification of Open and Inhomogeneous Heat Fluxes

    Sensors, Vol. 22, Núm. 6

2021

  1. Determining the thermal diffusivity and the principal directions on anisotropic moving samples with laser-spot thermography

    International Journal of Heat and Mass Transfer, Vol. 176

  2. Imaging real cracks: Evaluation of the depth and width of narrow fatigue cracks in Al-alloys using laser-spot lock-in thermography

    Proceedings of SPIE - The International Society for Optical Engineering

  3. Laser-spot step-heating thermography to measure the thermal diffusivity of solids

    International Journal of Thermal Sciences, Vol. 170

  4. Quantifying the width and angle of inclined cracks using laser-spot lock-in thermography

    NDT and E International, Vol. 122

  5. Sizing the depth and width of narrow cracks in real parts by laser-spot lock-in thermography

    Materials, Vol. 14, Núm. 19

2020

  1. Characterizing subsurface rectangular tilted heat sources using inductive thermography

    Applied Sciences (Switzerland), Vol. 10, Núm. 16