Publications (50) GONZALO MARIA GUERRICA ECHEVARRIA ESTANGA publications

2024

  1. How to Achieve a Highly Toughened 70/30 PLA/PCL Blend by Using Nucleating Agents and Tailoring Processing Conditions

    ACS Applied Polymer Materials, Vol. 6, Núm. 1, pp. 583-595

  2. Production of supertough and semiconductive PLA-based polymer blend nanocomposites by kinetic microstructural control

    Polymer, Vol. 296

  3. Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

    Polymer Testing, Vol. 130

2023

  1. Are ionic liquids effective curing agents for preparing epoxy adhesives?

    International Journal of Adhesion and Adhesives, Vol. 125

  2. Effect of Molecular Weight on the Crystallization and Melt Memory of Poly(ϵ-caprolactone) (PCL)

    Macromolecules, Vol. 56, Núm. 12, pp. 4602-4620

  3. Effect of the Simultaneous Addition of Polycaprolactone and Carbon Nanotubes on the Mechanical, Electrical, and Adhesive Properties of Epoxy Resins Cured with Ionic Liquids

    Polymers, Vol. 15, Núm. 7

  4. High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

    Macromolecular Materials and Engineering, Vol. 308, Núm. 12

  5. Ionic Liquids as Alternative Curing Agents for Conductive Epoxy/CNT Nanocomposites with Improved Adhesive Properties

    Nanomaterials, Vol. 13, Núm. 4

  6. Mechanical, electrical, and adhesive synergies in melt-processed hybrid bio-based TPU nanocomposites

    Polymer Testing, Vol. 124

2022

  1. Effect of compatibilizer addition on the surface nucleation of dispersed polyethylene droplets in a self-nucleated polypropylene matrix

    Polymer, Vol. 263

  2. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS Applied Polymer Materials, Vol. 4, Núm. 5, pp. 3369-3379

  3. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS APPLIED POLYMER MATERIALS, Vol. 4, Núm. 5, pp. 3369-3379

  4. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS APPLIED POLYMER MATERIALS

  5. Ionic Liquid-Cured Epoxy/PCL Blends with Improved Toughness and Adhesive Properties

    Polymers, Vol. 14, Núm. 13

  6. Sustainable PHBH–Alumina Nanowire Nanocomposites: Properties and Life Cycle Assessment

    Polymers, Vol. 14, Núm. 22

2021

  1. Attaining toughness and reduced electrical percolation thresholds in bio‐based pa410 by combined addition of bio‐based thermoplastic elastomers and cnts

    Polymers, Vol. 13, Núm. 19

  2. Composition dependent miscibility in the crystalline state of polyamide 6 /polyamide 4,10 blends: From single to double crystalline blends

    Polymer, Vol. 219

  3. Printability study of a conductive polyaniline/acrylic formulation for 3d printing

    Polymers, Vol. 13, Núm. 13

  4. Synthesis, structure, crystallization and mechanical properties of isodimorphic PBS-ran-PCL copolyesters

    Polymers, Vol. 13, Núm. 14

2019

  1. The effect of the preparation method and the dispersion and aspect ratio of cnts on the mechanical and electrical properties of bio-based polyamide-4,10/CNT nanocomposites

    Polymers, Vol. 11, Núm. 12