JAVIER BILBAO ELORRIAGA-rekin lankidetzan egindako argitalpenak (161)

2024

  1. Hydrocracking of a HDPE/VGO Blend: Influence of Catalyst-to-Feed Ratio on Fuel Yield and Composition

    Catalysts, Vol. 14, Núm. 3

2023

  1. A six-lump kinetic model for HDPE/VGO blend hydrocracking

    Fuel, Vol. 333

  2. Intensifying gasoline production in the hydrocracking of pre-hydrotreated light cycle oil by means of Pt and Pd supported on a spent FCC catalyst

    Fuel, Vol. 334

  3. Kinetic modeling of the hydrocracking of polystyrene blended with vacuum gasoil

    Chemical Engineering Journal, Vol. 451

2022

  1. Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling

    Fuel, Vol. 316

  2. Enhancing the performance of a PtPd/HY catalyst for HDPE/VGO hydrocracking through zeolite desilication

    Fuel, Vol. 329

  3. Hydrogen Pressure as a Key Parameter to Control the Quality of the Naphtha Produced in the Hydrocracking of an HDPE/ VGO Blend

    Catalysts, Vol. 12, Núm. 5

  4. Limitations in the energy balance when VGO/aqueous bio-oil mixtures are co-processed in FCC units

    Fuel, Vol. 324

2021

  1. Different approaches to convert waste polyolefins into automotive fuels via hydrocracking with a NiW/HY catalyst

    Fuel Processing Technology, Vol. 220

  2. Product composition and coke deposition in the hydrocracking of polystyrene blended with vacuum gasoil

    Fuel Processing Technology, Vol. 224

  3. Waste Refinery: The Valorization of Waste Plastics and End-of-Life Tires in Refinery Units. A Review

    Energy and Fuels, Vol. 35, Núm. 5, pp. 3529-3557

2020

  1. A hybrid FCC/HZSM-5 catalyst for the catalytic cracking of a VGO/bio-oil blend in FCC conditions

    Catalysts, Vol. 10, Núm. 10, pp. 1-15

  2. Co-cracking of high-density polyethylene (HDPE) and vacuum gasoil (VGO) under refinery conditions

    Chemical Engineering Journal, Vol. 382

  3. Converting the Surplus of Low-Quality Naphtha into More Valuable Products by Feeding It to a Fluid Catalytic Cracking Unit

    Industrial and Engineering Chemistry Research, Vol. 59, Núm. 38, pp. 16868-16875

  4. Effect of co-feeding HDPE on the product distribution in the hydrocracking of VGO

    Catalysis Today, Vol. 353, pp. 197-203

  5. Lessening coke formation and boosting gasoline yield by incorporating scrap tire pyrolysis oil in the cracking conditions of an FCC unit

    Energy Conversion and Management, Vol. 224

  6. Scrap tires pyrolysis oil as a co-feeding stream on the catalytic cracking of vacuum gasoil under fluid catalytic cracking conditions

    Waste Management, Vol. 105, pp. 18-26

  7. Synergy in the Cocracking under FCC Conditions of a Phenolic Compound in the Bio-oil and a Model Compound for Vacuum Gasoil

    Industrial and Engineering Chemistry Research, Vol. 59, Núm. 17, pp. 8145-8154

  8. Taking advantage of the excess of thermal naphthas to enhance the quality of FCC unit products

    Journal of Analytical and Applied Pyrolysis, Vol. 152

  9. Towards waste refinery: Co-feeding HDPE pyrolysis waxes with VGO into the catalytic cracking unit

    Energy Conversion and Management, Vol. 207