Publicaciones (19) Publicaciones de ITZIAR OTAEGI TENA

2024

  1. Production of supertough and semiconductive PLA-based polymer blend nanocomposites by kinetic microstructural control

    Polymer, Vol. 296

  2. Revealing Dynamic Behavior in High Dielectric Poly(thiourethane)-Based Vitrimer-like Materials

    ACS Applied Polymer Materials, Vol. 6, Núm. 9, pp. 5473-5484

  3. Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

    Polymer Testing, Vol. 130

2023

  1. Effect of the Simultaneous Addition of Polycaprolactone and Carbon Nanotubes on the Mechanical, Electrical, and Adhesive Properties of Epoxy Resins Cured with Ionic Liquids

    Polymers, Vol. 15, Núm. 7

  2. High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

    Macromolecular Materials and Engineering, Vol. 308, Núm. 12

  3. Ionic Liquids as Alternative Curing Agents for Conductive Epoxy/CNT Nanocomposites with Improved Adhesive Properties

    Nanomaterials, Vol. 13, Núm. 4

  4. Mechanical, electrical, and adhesive synergies in melt-processed hybrid bio-based TPU nanocomposites

    Polymer Testing, Vol. 124

2022

  1. Effect of compatibilizer addition on the surface nucleation of dispersed polyethylene droplets in a self-nucleated polypropylene matrix

    Polymer, Vol. 263

  2. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS APPLIED POLYMER MATERIALS

  3. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    ACS Applied Polymer Materials, Vol. 4, Núm. 5, pp. 3369-3379

  4. Ionic Liquid-Cured Epoxy/PCL Blends with Improved Toughness and Adhesive Properties

    Polymers, Vol. 14, Núm. 13

2021

  1. Attaining toughness and reduced electrical percolation thresholds in bio‐based pa410 by combined addition of bio‐based thermoplastic elastomers and cnts

    Polymers, Vol. 13, Núm. 19

  2. Composition dependent miscibility in the crystalline state of polyamide 6 /polyamide 4,10 blends: From single to double crystalline blends

    Polymer, Vol. 219

  3. Structure and properties of reactively extruded opaque post-consumer recycled PET

    Polymers, Vol. 13, Núm. 20

  4. Synthesis, structure, crystallization and mechanical properties of isodimorphic PBS-ran-PCL copolyesters

    Polymers, Vol. 13, Núm. 14

2020

  1. Fully Reversible Spherulitic Morphology in Cationically Photopolymerized DGEBA/PCL Shape-Memory Blends

    Macromolecules, Vol. 53, Núm. 4, pp. 1368-1379

2019

  1. The effect of the preparation method and the dispersion and aspect ratio of cnts on the mechanical and electrical properties of bio-based polyamide-4,10/CNT nanocomposites

    Polymers, Vol. 11, Núm. 12

  2. Using an ionic liquid to reduce the electrical percolation threshold in biobased thermoplastic polyurethane/graphene nanocomposites

    Polymers, Vol. 11, Núm. 3

2018

  1. Novel biobased polyamide 410/polyamide 6/CNT nanocomposites

    Polymers, Vol. 10, Núm. 9