AINHOA
ARRESE ARRATIBEL
PROFESORADO TITULAR DE UNIVERSIDAD
Publicaciones (24) Publicaciones de AINHOA ARRESE ARRATIBEL
2024
-
Energy release rate in bimaterial specimens tested in pure modes I and II
Engineering Fracture Mechanics, Vol. 301
2023
-
Mode decoupling in interlaminar fracture toughness tests on bimaterial specimens
Engineering Fracture Mechanics, Vol. 290
-
On the equivalent flexural and shear moduli of laminated beams: Definition and determination by bending tests
Composites Part A: Applied Science and Manufacturing, Vol. 175
2022
-
Analysis of displacement path dependence in mixed mode cohesive law
Engineering Fracture Mechanics, Vol. 276
2021
-
Mode II cohesive law extrapolation procedure of composite bonded joints
Engineering Fracture Mechanics, Vol. 244
2020
-
Mode I cohesive law characterization procedure in adhesive joints
ECCM 2018 - 18th European Conference on Composite Materials
-
Numerical assessment of an experimental procedure applied to DCB tests
Polymer Testing, Vol. 82
2019
-
A novel experimental procedure to determine the cohesive law in ENF tests
Composites Science and Technology, Vol. 170, pp. 42-50
2018
-
Analysis of DCB test of angle-ply laminates including bending-twisting coupling
Composite Structures, Vol. 190, pp. 169-178
-
Analysis of the DCB test of angle-ply laminates including residual stresses
Theoretical and Applied Fracture Mechanics, Vol. 94, pp. 197-204
-
Evolution of thermally modified wood properties exposed to natural and artificial weathering and its potential as an element for façades systems
Construction and Building Materials, Vol. 172, pp. 233-242
2017
-
A novel procedure to determine the cohesive law in DCB tests
Composites Science and Technology, Vol. 152, pp. 76-84
-
Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test
Theoretical and Applied Fracture Mechanics, Vol. 87, pp. 99-109
2016
-
Dynamic evolution of physical-mechanical properties of heat-treated wood exposed to weathering conditions
WCTE 2016 - World Conference on Timber Engineering
-
Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness
Engineering Fracture Mechanics, Vol. 163, pp. 462-475
-
New correction terms concerning three-point and four-point bending tests
Polymer Testing, Vol. 55, pp. 25-37
2015
-
A new approach for determining the R-curve in DCB tests without optical measurements
Engineering Fracture Mechanics, Vol. 135, pp. 274-285
-
Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II
Engineering Fracture Mechanics, Vol. 143, pp. 63-79
2012
-
Influence of the modification with MWCNT on the interlaminar fracture properties of long carbon fiber composites
Composites Part B: Engineering, Vol. 43, Núm. 3, pp. 1336-1340
2010
-
A new method for determining mode II R-curve by the End-Notched Flexure test
Engineering Fracture Mechanics, Vol. 77, Núm. 1, pp. 51-70