Publicaciones en las que colabora con FAUSTINO MUJIKA GARITANO (21)

2024

  1. Energy release rate in bimaterial specimens tested in pure modes I and II

    Engineering Fracture Mechanics, Vol. 301

2023

  1. Mode decoupling in interlaminar fracture toughness tests on bimaterial specimens

    Engineering Fracture Mechanics, Vol. 290

  2. On the equivalent flexural and shear moduli of laminated beams: Definition and determination by bending tests

    Composites Part A: Applied Science and Manufacturing, Vol. 175

2022

  1. Analysis of displacement path dependence in mixed mode cohesive law

    Engineering Fracture Mechanics, Vol. 276

2020

  1. Mode I cohesive law characterization procedure in adhesive joints

    ECCM 2018 - 18th European Conference on Composite Materials

  2. Numerical assessment of an experimental procedure applied to DCB tests

    Polymer Testing, Vol. 82

2019

  1. A novel experimental procedure to determine the cohesive law in ENF tests

    Composites Science and Technology, Vol. 170, pp. 42-50

2018

  1. Analysis of DCB test of angle-ply laminates including bending-twisting coupling

    Composite Structures, Vol. 190, pp. 169-178

  2. Analysis of the DCB test of angle-ply laminates including residual stresses

    Theoretical and Applied Fracture Mechanics, Vol. 94, pp. 197-204

2017

  1. A novel procedure to determine the cohesive law in DCB tests

    Composites Science and Technology, Vol. 152, pp. 76-84

  2. Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test

    Theoretical and Applied Fracture Mechanics, Vol. 87, pp. 99-109

2016

  1. Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness

    Engineering Fracture Mechanics, Vol. 163, pp. 462-475

  2. New correction terms concerning three-point and four-point bending tests

    Polymer Testing, Vol. 55, pp. 25-37

2015

  1. A new approach for determining the R-curve in DCB tests without optical measurements

    Engineering Fracture Mechanics, Vol. 135, pp. 274-285

  2. Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II

    Engineering Fracture Mechanics, Vol. 143, pp. 63-79

2012

  1. Influence of the modification with MWCNT on the interlaminar fracture properties of long carbon fiber composites

    Composites Part B: Engineering, Vol. 43, Núm. 3, pp. 1336-1340

2010

  1. A new method for determining mode II R-curve by the End-Notched Flexure test

    Engineering Fracture Mechanics, Vol. 77, Núm. 1, pp. 51-70

2009

  1. Analysis of in-plane and out-of-plane thermo-mechanical stresses in un-symmetric cross-ply curved laminated strips

    Journal of Composite Materials, Vol. 43, Núm. 25, pp. 3157-3184

2008

  1. Analysis of thermal stresses in unsymmetric cross-ply composite strips

    Journal of Composite Materials, Vol. 42, Núm. 12, pp. 1247-1266

  2. Influence of bending rotations on three and four-point bend end notched flexure tests

    Engineering Fracture Mechanics, Vol. 75, Núm. 14, pp. 4234-4246