Publicaciones (26) Publicaciones de JAVIER VALLEJO MATILLA

2019

  1. Design of an innovative fatigue test bench for dental implants

    Mechanisms and Machine Science (Springer Netherlands), pp. 103-111

2018

  1. Influence of vertical misfit in screw fatigue behavior in dental implants: A three-dimensional finite element approach

    Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Vol. 232, Núm. 11, pp. 1117-1128

2017

  1. Influence of design and clinical factors on the removal force ratio in tapered implant-abutment interfaces

    Journal of Prosthetic Dentistry, Vol. 117, Núm. 4, pp. 493-498

  2. Methodology for the assessment of equivalent load for self-lubricating radial spherical plain bearings under combined load

    Tribology International, Vol. 105, pp. 69-76

2014

  1. Effect of the preload in the general static load-carrying capacity of four-contact-point slewing bearings for wind turbine generators: Theoretical model and finite element calculations

    Wind Energy, Vol. 17, Núm. 10, pp. 1605-1621

  2. Experimental study of the removal force in tapered implant-abutment interfaces: A pilot study

    Journal of Prosthetic Dentistry, Vol. 111, Núm. 4, pp. 293-300

2013

  1. Dental implants with conical implant-abutment interface: Influence of the conical angle difference on the mechanical behavior of the implant

    International Journal of Oral and Maxillofacial Implants, Vol. 28, Núm. 2, pp. e72-e82

  2. General static load-carrying capacity of four-contact-point slewing bearings for wind turbine generator actuation systems

    Wind Energy, Vol. 16, Núm. 5, pp. 759-774

  3. Mantenimiento

    Nuclear España: Revista de la Sociedad Nuclear española, Núm. 342, pp. 30-33

2010

  1. Optimization of linkages for generalized rigid-body guidance synthesis based on finite element models

    Finite Elements in Analysis and Design, Vol. 46, Núm. 9, pp. 721-731

  2. Optimum synthesis of planar linkages using a strain-energy error function under geometric constraints

    Mechanism and Machine Theory, Vol. 45, Núm. 1, pp. 65-79

2009

  1. Close Range Digital Photogrammetry And Software Application Development For Planar Patterns Computation

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 76, Núm. 160, pp. 7-15

2007

  1. Soluciones para sistemas de almacenamiento automático e introducción de combustibles sólidos alternativos para la industria cementera

    Cemento Hormigón, Núm. 909, pp. 58-65

2000

  1. Second-order methods for the optimum synthesis of multibody systems

    Structural and Multidisciplinary Optimization, Vol. 19, Núm. 3, pp. 192-203

1999

  1. La directiva IPPC

    Revista DYNA, Vol. 74, Núm. 9, pp. 63-65

  2. Stamping die design based on numerical simulation and knowledge systematization

    International Journal of Computer Integrated Manufacturing, Vol. 12, Núm. 5, pp. 427-438

1998

  1. Lagrange multipliers and the primal-dual method in the non-linear static equilibrium of multibody systems

    Communications in Numerical Methods in Engineering, Vol. 14, Núm. 5, pp. 463-472

1997

  1. A procedure for the optimal synthesis of planar mechanisms based on non-linear position problems

    International Journal for Numerical Methods in Engineering, Vol. 40, Núm. 8, pp. 1505-1524

  2. Procedure for the optimal synthesis of planar mechanisms based on non-linear position problems

    International Journal for Numerical Methods in Engineering, Vol. 40, Núm. 8, pp. 1505-1524

  3. Síntesis de puntos triples en curvas de acoplador del cuadrilátero articulado

    Revista iberoamericana de ingeniería mecánica, Vol. 1, Núm. 1, pp. 5-22